A solar sign light system can be installed in any location, without the need for trenching electric cables. Solar lighting is an environmentally friendly and cost effective solution to illuminating signs in remote sites. Our commercial grade systems include all the necessary equipment to allow for a quick and easy installation.
This system includes between one and four 12’ LED light bars designed to illuminate signs internally or externally. The system can be supplied with more light bars upon request. The required quantity of lights necessary for your sign will depend on the size and design of your sign. Each light bar consumes approximately 4 Watts and emits 315 lumens. The solar kit includes the light fixture(s), solar panel, batteries, MPPT charge controller, outdoor-rated battery enclosure, necessary cables and solar panel mounting triangles. The required solar panel size and battery capacity is determined based on the quantity of lights needed, desired illumination time, and installation location.
Illumination time can be dusk to dawn, or 8 hours illumination. Additional illumination times available upon request. For 8 hours illumination or anything less than dusk to dawn, the illumination time can be split in to two periods using the built in dual timer option.
Please contact our sales team for help determining the appropriate sized solar panel and batteries based on your requirements and location.
Between one and four mini light bars are included in this system.
Illumination time is dusk to dawn, or 8 hours illumination.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Supplied with up to 3 nights autonomy.
Each light is fitted with ten SMD/LEDs.
Total of approx. 315 Lumens per lamp.
LED beam angle is approx. 120 degrees.
The light is fitted with approximately 18' (5.5m) of cable for easy connection to the battery box.
Additional extension cable is available (upon request) as an option.
The light fixture is weather rated to I.P 65.
Lamp dimensions approx. 11.5" long x .5" wide (280mm x 13mm).
12V DC system.
A high capacity 12 Volt AGM battery is supplied.
Battery capacity varies based on system requirements.
Capacity options include one or two 12Ah, 18Ah, 32Ah, 55Ah, 79Ah, 92Ah, or 105Ah.
Supplied with a weather proof battery enclosure.
Size and model of battery enclosure depends on batteries required.
Battery enclosure options include BE01, BE02 & BE03.
Battery enclosures are lockable with the use of a padlock (not included).
Outlets are installed on enclosures for “plug & play” connections.
BE01 is plastic construction.
BE02 & BE03 are constructed from galvanized steel, with a gray painted finish.
BE01 dimensions: 10.5" x 8" x 4.5"
BE02 dimensions: 9.9” x 15.75” x 8.9”
BE03 dimensions: 21.25” x 15.4” x 11.2”
Supplied with an aluminum framed glass faced solar panel
Solar panel size and power (Wattage) varies depending on light power, and installation location.
Solar panel(s) are supplied with a pair of mounting triangles for mounting on to flat horizontal or vertical surfaces.
Panel Wattage options include 20W 45W, 70W, 90W, 100, 140W, 240W, 280W & 480W.
20W panel dimensions: 22.5" x 14" x 1"
45W panel dimensions: 34.25” x 20.13” x 1.5”
70W panel dimensions: 32.35” x 26.22” x 1.5”
90W panel dimensions: 40.25” x 26.25” x 1.5”
100W panel dimensions: 47.87” x 26.43” x 1.5”
140W panel dimensions: 44” x 38.7” x 1.5” (or may be supplied as two 70W panels).
240W panel dimensions: 64.38” x 39” 1.5”
280W panel consists of two 140W panels.
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
An optional Bluetooth dongle can be purchased to allow access to the charge controller history and programming options.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Low voltage detection for automatic disconnect.
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Operating temperature is -22 deg. F (-30 deg. C) to 140 deg. F (+60 deg. C).
Easy to install. All connections are simply plug & play.
The light is mounted using the supplied adhesive backing.
Light fixtures can be used for internal or external illumination.
Solar panel must face south and be in direct view of the sun throughout the day.
System requirements are based on solar panel facing south, and angled 15 degrees plus installation latitude.
If above requirements can not be met, notify the sale team so we can calculate system requirements.
Subject to warranty registration, a limited 20 year solar panel warranty applies and a limited 5 year warranty on all other components (excluding batteries). Battery warranty (if applicable) is with the battery manufacturer.* Warranty registration is required (after purchase), otherwise a standard 30 day limited warranty will apply. After making your purchase, go to www.solarilluminations.com/registration to register your warranty.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||Approx. 315 Lumens.|
|Approximate Illumination Time||Typically dusk to dawn.|
|Approximate Sign SIze||Up to 6' x 4' (2m x 1.5m) per lamp.|
|Solar Panel Wattage||From 20 Watts.|