Menu
Your Cart
M - F | 8am - 5pm (EST) | Phone: +1 239-461-5522

Accessories & Hardware

Model: MA01
Add this wired remote control illuminated on/off switch to the many of our solar systems. This switch is design for use with a solar energy system only and not for use with any other system or application. It allows the user to switch the lamps on or off at a location other than from the batter..
$79.99
Model: TC01
This time clock enables some of our solar powered systems switch on or off as desired, per schedule. Simply program the time clock for your chosen setting. This is a 24 hour / 7 day timer so it has multiple timed settings for daily or weekly operation. This timer module is easy to install.This dig..
$49.99
Model: BP01
This battery protection device can be connected directly between your battery supply and load to prevent battery discharging. This device will cut power to the load when the battery voltage drops to a programmable voltage. Once the batteries have recharged, power will be automatically supplied to th..
$51.99
Model: CC04
Solar Illuminations offers a range of MPPT charge controllers that use the latest and fastest technology. They intelligent charge controllers maximize the energy harvested, driving the energy to achieve full charge in the shortest time possible. This increased performance promotes battery health and..
$129.99
Model: CC05
With the Bluetooth Connect dongle you can configure MPPT settings, display system performance, and recall up to 30 days of system history on iOS and Android devices, using the app. This allows the user to view information wirelessly such as battery status, solar panel power, load current, plus other..
$89.99
Model: CC01
This PWM type charge controller is suitable for 12 volt or 24 volt DC panels. We offer a choice of 3 Amp, 5 Amp or 10 Amp versions. It can be used as a standalone charge controller or the solar panel can act as a photocell for controlled lighting use. This component is designed for use with a solar ..
$49.99
Model: SP11
This heavy duty kit enables a solar panel to be pole mounted. It offers a wide range of adjustment to suite a variety of solar panels. The panel tilt is fully adjustable between 0-90 degrees (Horizontal to Vertical).Solar Illuminations own designed accessory. This kit consists of an painted galvan..
$199.99
Model: SP12
This heavy duty kit enables a solar panel to be pole mounted to the top of a pole. The coupling secures to a maximum diameter of 4.5” (115mm). It offers a wide range of adjustment to suite a variety of solar panels. The panel tilt is fully adjustable between 0-90 degrees (Horizontal to Vertical).S..
$149.99
Model: SP04
This heavy duty kit enables a solar panel to be side pole mounted or mounted to a flat surface. It offers a wide range of adjustment to suite a variety of solar panels and applications.Solar Illuminations own designed accessory. This kit consists of a painted galvanized steel frame that enables yo..
$79.99
Model: SP08
This heavy duty kit enables a solar panel to be pole mounted. It offers a wide range of adjustment to suite a variety of solar panels. The panel tilt is fully adjustable between 0-90 degrees (Horizontal to Vertical).Solar Illuminations own designed accessory. This kit consists of an aluminium fram..
$149.99
Model: SP13
This heavy duty kit enables a battery box to be side pole mounted. It offers a wide range of adjustment to suite a variety of pole sizes.Technical Specifications Performance Allows pole mounting of BE02 and BE03 battery enclosures. Adjustable Stainless Steel Banding is optional, select th..
$49.99
Model: GR01
This galvanized steel grille is designed to protect our fixture gainst theft, accidental damage, and vandalism. It is an optional item suitable for our FL17 or FL20 systems. Price from $39.99.This is a galvanized steel grille designed to protect our single lamp and double lamp shade from theft and..
$39.99
Model: FL11 Suport Arm
Some sign light and billboard light system installations may require one or more of these support arms. It enables the light fitting to be installed a distance away, allowing for a larger illumination distribution. Can be used for mounting on or under billboard catwalks. Sold as a single unit.This..
$39.99
Model: FL01 Ground Spike
This ground spike is the perfect accessory for those wishing to ground stake their solar panel or fixture at the base of their flag pole. Simply attaches to the bracket of the solar panel or fixture. Also ideal for temporary applications.This kit consists of a single alloy ground spike which is su..
$2.99
Model: FL12
This heavy duty fixture clamp attachment kit was designed by us through popular demand. It enables our FL05, FL06, FL09, FL10, and numerous other floodlights to attach directly to a round pole and still allows the floodlight to be adjusted to the desired angle.This kit consists of a heavy duty ste..
$24.99
Model: FL13
This heavy duty solar panel clamp attachment kit was designed by us through popular demand. It enables our 6w, 7w, 10w, 14w, 20w or 30w solar panel to attach directly to a round pole or most vertical or horizontal surfaces and still allows the solar panel to be adjusted to the desired angle.This k..
$29.99
Model: RC01
This extension cord increases the length of the solar panel wire for the IL03, SF01, SF03, SF04, SF05, FL03, FL05, or FL06. It has a female plug at one end and a male plug at the other end enabling your original cord to be extended by approximately 26'.If you need to extend your cable for the sola..
$24.99
Model: RC06
This extension cord increases the length of your light fixture or solar panel (45 Watts and above). Select the desired lenght of cable, and then select whether the extension cord is for a light fixture or solar panel. We recommend limiting your solar panel cable to a maximum of 50' to prevent voltag..
$24.99
Model: FL99
This kit consists of a unique alloy clamp which is suitable for attaching to our FL06 floodlight. By attaching this clamp kit, the FL06 floodlight can be fixed directly to a round post or round pole. We offer three different size clamps.The small size is suitable for pole up to approximately 2.5"&..
$7.99
Model: SP01
This kit is therefore ideal for those who want the absolute maximum efficiency from their PO04 Balmoral lamp post light, where the geographic location is not generally ideal, or where the winter months could have an adverse effect.This unique (optional) kit comprises of a pair of 5 Watt solar pane..
$99.99
Model: SP02
This kit is therefore ideal for those who want the absolute maximum efficiency from their PO05 Balmoral lamp post light, where the geographic location is not generally ideal, or where the winter months could have an adverse effect.This unique (optional) kit comprises of a pair of 10 Watt solar pan..
$199.99
Model: RC11
Motion Detector 24V/12VTechnical Specifications PerformanceMotion Detector 24V/12V.Remarks One year warranty*. Additionally, unlimited, lifetime technical support is available for all warranty registrations.Please Note: This product is a special order and is non-returnable ..
$49.99
Model: RC12
This high quality, weatherproof, commercial grade, digital motion detector is designed to be configured with many of the lighting systems that we offer. It is a 12 volt sensor with a fully adjustable detection from 33' to 114' (11,000 square feet). It has a coverage area of 90 degrees, 114' x 97' ma..
$129.99
Model: RC13
This high quality, weatherproof, commercial grade, quad element, digital motion detector is designed to be configured with many of the lighting systems that we offer. It is a 12/24 volt sensor, programmable with a fully adjustable detection from 26' to 97' (9,400 square feet). It has a coverage area..
$199.99
Model: RC14
This high quality, weatherproof, commercial grade, digital motion detector is designed to be configured with many of the lighting systems that we offer. It is a 12 volt or 24 volt sensor with a fully adjustable detection from 15' to 40'. It has a coverage area of about 90 degrees. This component is ..
$69.99
Model: SP03
This is a lightweight aluminum Z-Bracket (Set of 4) for mounting solar panels to flat surfaces. Simply mount the bracket to the solar panel using the bolts supplied and screw the panel to your structure. Ideal for RV, Marine, Boat, Car, and Home applications. Design to work with most aluminum f..
$29.99
Model: CC02
This MPPT type charge controller is suitable for 12 volt or 24 volt DC panels. Maximum rating is 20 Amps. Typically at least 30% more efficient than regular PWM charge controllers. Far more efficient than a regular PWM solar charge controller. This programmable control module regulates and manages t..
$149.99
Model: CC03
This PWM type charge controller is suitable for 12 volt or 24 volt DC panels and has a dual timer option. Rated at 20 Amp max. It can be used as a stand alone charge controller or the solar panel can act as a photocell for controlled lighting use.This control module offers a dual timer mode which ..
$99.99
Showing 1 to 28 of 28 (1 Pages)