This time clock enables some of our solar powered systems switch on or off as desired, per schedule. Simply program the time clock for your chosen setting. This is a 24 hour / 7 day timer so it has multiple timed settings for daily or weekly operation. This timer module is easy to install.
This digital time clock is ideal for solar systems where the installer or user requires specific timed settings. This switch is designed for use with a solar energy system only and not for use with any other system or application. Because this is a 24 hours 7 day timer it allows multiple different timed settings on a daily or weekly basis. It should be flexible enough to meet most requirements. It is easy to install and can be housing within the battery box. There is a built-in lithium battery which provides reserve power in the event of 12v loss and should retain all programming such as date, time and program modes. It can be attached to a surface with a self-adhesive pad or the module has pre-drilled mounting holes so it can be fixed using small screws or bolts. On the face of the timer there is an LCD digital screen and an LED to show the status of the internal relay (open = LED not lit, closed = LED lit). This compact timer is small and neat. If you have more than one grow light fixture it is possible to add multiple time clocks to control each light fixture (if required). Therefore each light fixture can turn on or off at different times via each time clock.
Manufactured to ISO9001 quality standards.
12 volt dc time clock suitable for some of our solar energy systems.
24 hour / 7 day programming.
Power consumption: 4.5VA (max.).
17 available on/off modes (maximum per day).
Minimum on/off interval is 1 minute.
LCD digital screen.
LED (on) indicator light.
Two terminals for 24v dc power.(+ve and -ve).
Two terminals for single pole changeover relay.
Relay has a maximum load rating of 16 Amps at 250v AC.
Dimensions 2.5" x 2.5" x 1.25" (6cm x 6cm x 3.5cm) LxWxD.
One year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.