SL15 Solar Street Light 10W to 30W (With Pole)

Performance
Sold as a professional, commercial grade complete lighting system.
Manufactured in an ISO9001:2000 'Quality Assured' facility.
Operating voltage is 24v. DC.
Special control system to prevent over-charging and over-discharging.
Power consumption from 10W (1,850 Lumens) to 30W (5,550 Lumens)
Typically dusk to dawn illumination (subject to geographic location, LED bulb Wattage and solar panel Wattage selected).
Up to 3 days autonomy (reserve power) to allow for successive cloudy weather and days without sunshine (subject to the specification of the system selected).

Light Fixture
Supplied with a single LED light fixture.
The fixture is configured with one LED module containing 14 high output Philips Luxeon® T LEDs.
Can be supplied with a Type I, II, III, IV or V lighting distribution pattern.
Choice of LED color temperature (warm white, daylight white, or cool white). Daylight white is standard.
Warm white is approx. 3,800~4,100k.
Daylight white is approx. 5,000~5,650k.
Cool white is approx. 5,650~6,300k.
Other LED color temperatures are available upon request, or by special order, from 2700k to 6500k and also turtle friendly yellow.
Lumen tolerance +/- 5%.
The 10 Watt lamp unit provides 1,850 Lumens of light output.
The 15 Watt lamp unit provides 2,775 Lumens of light output.
The 20 Watt lamp unit provides 3,700 Lumens of light output.
The 25 Watt lamp unit provides 4,625 Lumens of light output.
The 30 Watt LED lamp unit provides 5,550 Lumens.
LED life is typically up to 100,000 hours or equal to about 22 years.
Fixture attaches to the lamp support arm which in turn attaches to the pole.
Black colored powder coated finish.
Stainless steel hardware.
CRI is 80.

Battery
24V DC systems use two 12V sealed lead acid, AGM or GEL type rechargeable batteries.
Battery capacity is subject to the specification of the system selected.
Battery capacity options are 18 Ah, 32 Ah, 55 Ah per battery.
Battery dimensions vary subject to battery capacity. Battery weight will vary subject to battery capacity. All sizes shown above will fit inside the battery box.
Typical battery life is approximately 3-5 years subject to environmental factors.
Alternative battery types, capacities and sizes may be available upon request.
Higher capacity batteries may be required for more demanding applications and/or locations with lower insolation.

Solar Panel
Highly efficient polycrystalline solar panel.
Aluminum frame with anti-aging and encapsulated.
Low reflecting tempered glass.
The solar panel is supplied with a support frame and hardware to attach to the top of the pole.
The hardware includes a steel tenon that is approximately 50cm (16") which will increase the total height of the pole.
Wattage of solar panel is subject to the specification of the system and the solar panel wattage has no effect on the illumination output of the lamp.
Wattage available include 90W, 100W, 180W, and 200W .
90W & 100W solar panel dimensions are approx. 40.25" x 26.25" x 1.5" (112cm x 99cm x 3.5cm) LxWxD.
Solar panels can be supplied in a dual format (2 x 90W = 180W, 2 x 100W = 200W.)
Typical solar panel life is approximately 20-25 years subject to environmental factors.
The geographic location of the street light may affect the size/wattage of the solar panel required.
A higher wattage solar panel may be required for more demanding applications and/or locations with lower insolation.

Arm
Galvanized steel arm to accommodate the lampshade.
Attaches to the street light pole.
Satin black colour finish. Custom colours by special order only.

Post / Pole
Galvanized steel pole which attaches to the top of the battery box cabinet.
Pole surface has a turned (fluted) rib design.
Pole has a square flat base (flat plate) with pre-drilled holes for bolting directly to the battery box cabinet.
Fixing bolts are included.
Wind load rating for pole is 140 MPH with a 1.3 gust factor.
Pole height is approx. 13' (4 metres). Custom height pole by special order only.
Pole attaches to battery box cabinet and solar panel support frame attaches to top of pole. Total height of pole is approx. 16' (5 metres) when assembled.
Satin black color finish. Custom colors by special order only.

Battery Box
Galvanized steel battery box accommodates the rechargeable batteries and control module.
Pre-drilled holes in the battery box cabinet base enable secure installation.
The pole attaches to the top of the battery box.
Satin black color finish. Custom colors by special order only.
Battery box is approx. 14” x 14” x 17” (35cm x 35cm x 43cm) LxWxH.
Two templates for setting the fixing bolts into new, wet concrete are included.
The templates for aligning the anchors are approx. 17 3/4" x 17 3/4" (45cm x 45cm).
The bolt pattern (diagonal distance from one hole center to another) is approx. 22 3/16" (56cm).
The 4 pre-drilled holes on each template are approx. 5/8" (1.5cm) diameter.

Control Module
This system includes a programmable control module and regulates and manages the solar panel power, battery power and illumination timer.
The compact control module has LED indicators to display status, input connections for solar panel and batteries and output connections for the lamp.
Push button programming.
Accepts and controls GEL and AGM type batteries.
Low voltage disconnect regulated by state of charge or voltage.
Detects daytime and night time conditions via the solar panel.
Automatic adaption to ambient temperature conditions.
Safety features for short circuit and reverse polarity protection of battery and lamp inputs.
Automatic voltage recognition.
Float voltage for 24v system is 27.4v dc.
Low voltage disconnect for 24v system is 22.8 ~ 23.8v dc.
Reconnect voltage for 24v system is 25.6v dc.
Dimensions approx. 11 cm x 10 cm x 4 cm (4" x 4" x 1.5") LxWxD.
Ambient temperature range -40 deg C ~ +50 deg C (-40 deg F ~ +122 deg F).
Programmable lock-out feature for optional use to prevent accidental or unauthorized tampering.
User programmable illumination time of up to 1 to 12 hours or dusk-to-dawn setting (where conditions permit).
Default setting is typically dusk to dawn.
User or installer can set the control module to run from dusk and then shut off after a certain amount of hours.
For example from dusk for 4 hours then switch off, or run from dusk for 6 hours then switch off.
Instructions are supplied should the user or installer need to program or re-program the module*.
The illumination time may be determined by, and subject to, the specifications of the system and the insolation levels at the installation site.

Interconnecting Cabling
Connection wiring between the battery box, solar panel and lamp unit is included.

Remarks
We stand behind our lighting systems with one of the best and most comprehensive warranties in the industry. With valid warranty registration, this system is offered with a 10-year limited warranty and the solar panel with a 20-year limited warranty, in accordance with our Terms, Conditions, and Policies. Free, unlimited, lifetime technical support is offered with the warranty.

Please Note:
This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.

Any concrete work required to facilitate the installation of a pole should not be conducted until all materials have been supplied and have been inspected and verified as being correct and suitable. Solar Illuminations does not accept any responsibility whatsoever for any works carried out in advance, including (but not limited to) ground, excavation, or civil works, pouring or creation of any concrete, cement, etc.

The product specifications above should be used as a general guide. We can offer modifications and changes to the specifications of this product if necessary. This may be required to meet your specific needs and/or due to the geographic location of the installation site. In locations where insolation levels are poor or lower than normal, a higher wattage solar panel and larger capacity batteries may be required. We offer product customization. MPPT, dual timer and dimming charge controllers are all available as optional extras. One or more motion sensors can also be added as an optional extra. Other options included UL listed or ETL certified components and the provision of Buy American Act (BAA & ARRA) compliance, if required. Photometric data, 3D renderings and planning of your lighting project is available. Please contact our sales department for more information before making your purchase.

*View our Terms, Conditions and Polices (including our Returns Policy) for further information.