This integrated solar street light includes a choice of pole heights and is available in three LED power options. Choose from 60 Watt, 80 Watt, or 100 Watt. Illuminate a large area without the hassle and cost of running electricity. Sold with necessary components. Once the pole is installed, the light fixture simply attaches to the top of the light pole, making a quick and easy installation. Several light modes are available which can be selected with the included remote control. Pole heights options are 10' (3M) to 26' (8M). Prices from $1,499.99.
The solar panel is discretely installed on the top of the fixture, with a lithium battery installed inside, and a cluster of powerful white LEDs mounted on the under-side of the unit. A motion sensor is installed on the underside of the light which can be used depending on the lighting mode selected. Lighting mode can be changed with the included remote control. This solar powered area light fixture offers three different modes which can be selected by the installer or end-user with the supplied remote control. Light output is adjustable with 100%, 70%, or 50% options. Timed mode. This provides automatic illumination at dusk at 100%, 70%, or 50% output. Motion sensor mode. This provides automatic illumination at dusk upon motion detection at either 100%, 70%, or 50% output. Mixed mode. This provides automatic illumination at dusk for up to 6 hours at 100%, 70%, or 50% output, then off, except upon motion detection until dawn at 100%, 70%, or 50% output. This all in one solar street light fixture is supplied with adjustable mounting collar allowing for angle of the light fixture to be changed during installation. Color of product is gray. Color of light output is white 6000K.
Technical Specifications
Performance
All-in-one design, supplied with galvanized steel surface mount pole.
Weather rating is I.P. 65
Light modes include:
Timed mode: 6hr, 9hr, or 12hr, set to 50%, 70% or 100%.
Sensor mode: Light will turn on a 33% and will switch to 100% when motion is detected.
Mixed mode: Light will illuminate at full power for X hours and switch to motion sensor for remainder of the night.
Light Fixture
Integrated design street light with a choice of 60W, 80W, or 100W LED power.
Motion sensor detection range (at ground level) is up to 20' forward and with a 90 degree detection spread, up to 13' left/right.
The detection range will vary based on mounting height, local ambient temperature etc.
5,500~6,000 LED color temperature.
LED status LEDs indicate charge, battery, and lamp status.
Pinhole on/off switch.
There are 3 mode options available which can be selected using the supplied IR remote control.
Timed mode – Offers automatic illumination at dusk at 100%, 70%, or 50% output.
Motion sensor mode – Offers automatic illumination at dusk upon motion detection at either 100%, 70%, or 50% output.
Mixed mode – Offers automatic illumination at dusk for up to 6 hours at 100%, 70%, or 50% output, then off, except upon motion detection until dawn at 100%, 70%, or 50% output.
The 60W model emits 6,500 Lumens at full power.
The 80W model emits 8,500 Lumens at full power.
The 100W model emits 10,500 Lumens at full power.
The 60W model dimensions 38" x 14" x 4" (96cm x 35cm x 10cm) LxWxD.
The 80W model dimensions 44" x 14" x 4" (112cm x 35cm x 10cm) LxWxD.
The 100W model dimensions 50" x 14" x 4" (127cm x 35cm x 10cm) LxWxD
Battery
Lithium battery is supplied with the light fixture.
60 Watt model supplied with a 12.8V 302 Watt-hour battery.
80 Watt model supplied with a 12.8V 403 Watt-hour battery.
100 Watt model supplied with a 12.8V 502 Watt-hour battery.
The system has built-in charge control with over-charge and discharge protection.
Solar Panel
Fitted with glass covered solar panel.
The 60W model has a 64 Watt solar panel.
The 80W model has a 85 Watt solar panel.
The 100W model has a 102 Watt solar panel.
Pole
All poles are made of galvanized steel and supplied with a satin gray finish. Black color is also available.
The 10', 15' and 20' standard duty (SD) poles have has a welded base plate of approximately 1/3" (8mm) thick and approximately 10" x 10" (25cm x 25cm) square.
The SD pole base has four pre-drilled elongated holes 3/4" wide.
All SD poles are 3" (76mm) diameter (O.D.) at the top and approximately 4.5" (115mm) diameter at the base.
SD poles are supplied with a rebar/anchor kit is included for installation into wet concrete with nuts, bolts and washers. They can be fixed to an existing concrete pad using suitable expanding anchor bolts (not included).
The 15', 20' and 26' heavy duty (HD) poles have a square flat base (flat plate) with pre-drilled holes for installation which are approx. 3/4" (20mm diameter).
The HD poles have a square base plate which is approximately 12.5" x 12.5" (320mm x 320mm).
All HD poles are supplied with J bolts and two templates for setting the fixing bolts into new, wet concrete are included and are approx. 12.5" x 12.5" (320mm x 320mm).
The heavy duty poles have a bolt pattern (diagonal distance from one hole center to another) of approx. 12.75" (323mm).
The top of the HD poles have an outside diameter of approximately 3" (76mm) and tapers outwards towards the base.
Installation
Short support arm and mounting bracket is included.
Easy installation onto a round pole.
The mounting collar will fit over a 3" diameter pole.
Ideal mounting height for the models are as follows:
60W up to 26'.
80W up to 29'.
100W up to 32'.
Remarks
With valid warranty registration, this fixture is offered with a 24 month warranty (excluding battery), in accordance with our Terms, Conditions, and Policies.
Please Note:
This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
Any concrete work required to facilitate the installation of a pole should not be conducted until all materials have been supplied and have been inspected and verified as being correct and suitable. Solar Illuminations does not accept any responsibility whatsoever for any works carried out in advance, including (but not limited to) ground, excavation, or civil works, pouring or creation of any concrete, cement, etc.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
PDF Data
