BC22 Solar LED Bollard Light

This large (39" high), square profile, LED solar bollard light is ideal for walkways, driveways, parking lots, public areas, sidewalks, trails, etc. Because it's solar powered, it's easy to install almost anywhere.

This professional, commercial grade, solar bollard light fixture is one of the brightest of its type on the market at this time. It's made from cast aluminum and is powder coated with a black finish. It features a large, square shaped, clear polycarbonate lamp shade. The solar panel is neatly integrated into the top of the the fixture above the lampshade section. Inside the fixture there is a pre-installed lithium battery pack along with a MPPT charge control module. This solar powered bollard light will automatically illuminate at dusk. The lampshade section is fitted with 16 high intensity, white colored LED's within the circular clear lens section. In a dark location this bollard is capable of projecting light outwards and downwards up to about 24' (7M) 360 degrees. This bollard light produces 500 lumens at 100% output. As an option, it can be ordered with a motion sensor feature that enables the light to operate at a low output and revert to full output upon motion detection. Dimming and other custom modes are available by special order. Installation is quick and simple as it can be attached to almost any solid level surface. Color of light output is white. Color of product is black.
PLEASE NOTE - THIS IS A SPECIAL ORDER PRODUCT, MADE TO ORDER.

Solar powered bollard lights are ideal for municipalities, entrances, parking lots, HOA communities, walkways, sidewalks, trails, tracks, and driveways etc. May be used in either a residential or commercial environment.

Performance
Typically illuminates dusk to dawn (subject to location).
Automatically turns on at dusk and off at dawn.
Motion sensor option available.
Dim/bright mode feature available.
All cast aluminum, heavy duty construction.
Satin black powder coated finish.
Other colors available via large quantity orders.
Illumination pattern is 360 degrees with projection of light down towards the ground, outwards.
IP68 weather rated.
LED colour temperature choice is 3000k to 6500k.
The bollard has a square profile body that is approx. 6" x 6" (15cm x 15cm).
The total height is approx. 39" (100cm).
The square flange base section is approx. 8.5" x 8.5" (22cm x 22cm),
The flange section has four 1/2" (10mm) pre-drilled holes.
The clear lampshade section is approx. 12" x 12" (31cm x 31cm) diameter.
Other heights available by special order.
Certifications include CE, IEC, TUV,IESNA, RoHS LM-79 and LM-80.
Manufactured in an ISO9001 quality assured facility.

Light Fixture
Fitted with 16 super bright, high output white coloured LED bulbs.
Each LED produces 35 lumens (130 lm/W).
LED power is 4W at 100% output.
500 lumens.
CRI >80.
Clear polycarbonate lampshade.
UV treated to prevent yellowing.

Battery
Supplied with a pre-installed lithium (LIFEPO4) battery.
The lithium battery is 6.4V / 6 A-Hr.
Typical lifespan is up to 10 years and is replaceable.
Integrated MPPT charge controller.
Battery management system (BMS) feature.
Over load, over current, over temperature, over voltage, over charge and over discharge monitoring and protection.

Solar Panel
High quality 6.3 Watt encapsulated monocrystalline solar panel.
The solar panel is set into the top section of the bollard fixture.
Grade A rated with tempered glass top.

Installation
Easily installed onto almost any horizontal solid surface.
Base plate of bollard has 4 pre-drilled holes for screw-down or bolt-down installation.
Standard grade, steel, 4" expanding anchor bolts are included along with a template.
Spacing is at the owner/installer's discretion anywhere from 10' to 40' apart (subject to any specific requirements and/or location).
A direct burial (root-mount) version is available by special order.

With valid warranty registration, this fixture is offered with a 24 month warranty (excluding battery), in accordance with our Terms, Conditions, and Policies.

Please Note:
This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced. The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.

*View our Terms, Conditions and Polices (including our Returns Policy) for further information.