Menu
Your Cart
M - F | 8am - 5pm (EST) | Phone: +1 239-461-5522

PO12 Solar Windsor Lamp Post Light (With Heavy Duty 10' Pole)

This solar street light is supplied with a 3W LED lamp. Sold as a complete system. This stye of light fixture is ideal for those requiring a slightly more traditional design. It is capable of providing higher than normal levels of illumination and equal that of a standard incandescent light bulb. This model is supplied with a heavy duty steel powder coated black pole.

This commercial grade lamp post is our own design. This cast aluminum lampshade is fitted with four glass panels and contains a super bright 3W (300 lumen) LED bulb. This is equal to 40W of incandescent lighting. This product includes a programmable control module, which allows for customized illumination time. There are three powerful solar panels that are each built neatly and discretely into the top of the lampshade. When installed at a height of 10’ the solar panels are barely noticeable and blend in within the design of the lampshade. The light will automatically illuminate when it gets dark, and typically illuminates from dusk to dawn (when using the 3W LED bulb). The user/installer can set the programmable control module to enable the light to come on at dusk and illuminate for a pre-set amount of hours creating a single timed mode. A dual timed mode is also available with the MPPT control option. This allows a timed mode after dusk and a timed mode before dawn. Color of light output is warm white. Color of product and pole is black.

Popular Uses
 

This lamp post light can also be used to replace a lamp that is damaged or where the electric cable is defective. A popular choice with private developments, communities, parks, and local authorities. This product can also be used for driveways, footpaths and general public areas etc.

Technical Specifications
 

Performance
Typically dusk to dawn illumination each night (with 3W LED bulb).
Choice of single timer or dusk to dawn settings with standard PWM controller.
Choice of single or dual timer settings for MPPT controller.
Up to 3 days reserve (autonomy) power to allow for cloudy days (subject to local conditions).
Commercial grade quality.
Matt black powder coated finish.
I.P. 65 rating.

Light Fixture
Lampshade is fitted with a removable bulb containing multiple super bright LED's.
LED color tempearture choice of white or warm white.
LED's are arranged onto an E26/E27 screw-in light bulb providing a uniform 360 degree lighting pattern. The E26/E27 LED light bulb is replaceable.
Warm White LED color temperature is 2700 to 3500k.
Alternative E26/E27 units (with different color temperatures) are available by special order.
3W LED bulb provides 300 Lumens of light.
Equivalent to a conventional (incandescent) 40 Watts of incandescent lighting.
Lampshade with round base (collar) to fit an approximate 3" (76mm) diameter round post or round pole.
Holes are pre-drilled in the round base (collar) of the lampshade enabling it to be secured to the pole with bolts or screws.
The clear glass lampshade has 4 glass panels, each toughened and tempered.
The glass sections are 1/5" (5mm) thick
The lampshade is approximately 23" (58cm) high x 18" x 18" (46cm x 46cm).

Battery
A 12 volt 12 Amp/Hour sealed rechargeable battery is supplied and located within the top of the lampshade.
Battery should be replaced every 3 years.
Battery is accessed by a removable panel on the top of the lampshade.
The battery has a working temperature to as low as -40 deg F (-40 deg C) and to as high as +122 deg F (+50 deg C).

Pole
Supplied with a heavy duty steel pole with a matt black powder coated finish.
The pole is approximately 9.5' (285cm) high and has a welded base plate approximately 1/3" thick and approximately 10" x 10" (25cm x 25cm) square.
The pole base has four pre-drilled elongated holes approximately 3/4" (2cm) wide.
The pole is approximately 3" (76mm) diameter (O.D.) at the top and approximately 4.5" (115mm) diameter at the base.
Entire lamp post (pole and lampshade) stands approximately 11' 6" (3.5m) high.

Control Module

PWM Controller
This system can be supplied with a programmable control module and regulates and manages the solar panel power, battery power and illumination timer.
The compact control module has LED indicators to display status, and houses connections for solar panel, batteries, and the lamp.
Push button programming.
Accepts and controls GEL, AGM and sealed lead acid type (VRLA) batteries.
Low voltage disconnect regulated by state of charge or voltage.
Detects daytime and night time conditions via the solar panel.
Automatic adaption to ambient temperature conditions.
Safety features for short circuit and reverse polarity protection of battery and lamp inputs.
Automatic voltage recognition (12v or 24v).
Float voltage for 12v system is 13.7v dc and for 24v system is 27.4v dc.
Low voltage disconnect for 12v system is 11.4 ~ 11.9v dc or for 24v system is 22.8 ~ 23.8v dc.
Reconnect voltage for 12v system is 12.8v dc or for 24v system is 25.6v dc.
Dimensions approx. 11 cm x 10 cm x 4 cm (4" x 4" x 1.5") LxWxD.
Ambient temperature range -40 deg C ~ +50 deg C (-40 deg F ~ +122 deg F).
Protection rating I.P.22
Programmable lock-out feature for optional use to prevent accidental or unauthorised tampering.
User programmable illumination time of up to 1 to 12 hours or dusk-to-dawn setting (where conditions permit).
Default setting is typically dusk to dawn.
User or installer can set the control module to run from dusk and then shut off after a certain amount of hours.
For example from dusk for 4 hours then switch off, or run from dusk for 6 hours then switch off.
Instructions are supplied should the user or installer need to program or re-program the module*.

MPPT Controller
This system can be supplied with a MPPT charge controller (programmable control module) which regulates and manages the solar panel power, battery power and illumination timer.
The compact control module has LED indicators to display status, input connections for solar panel and batteries and output connections for the lamp.
Push button programming.
Accepts and controls GEL, AGM and sealed lead acid type (VRLA) batteries.
Low voltage disconnect regulated by state of charge or voltage.
Detects daytime and night time conditions via the solar panel.
Automatic adaption to ambient temperature conditions.
Safety features for short circuit and reverse polarity protection of battery and lamp inputs.
Automatic voltage recognition (12v or 24v).
Float voltage for 12v system is 13.7v dc and for 24v system is 27.4v dc.
Low voltage disconnect for 12v system is 11.4 ~ 11.9v dc or for 24v system is 22.8 ~ 23.8v dc.
Reconnect voltage for 12v system is 12.8v dc or for 24v system is 25.6v dc.
Dimensions approx. 11 cm x 10 cm x 4 cm (4" x 4" x 1.5") LxWxD.
Ambient temperature range -40 deg C ~ +50 deg C (-40 deg F ~ +122 deg F).
Protection rating I.P.22
Programmable lock-out feature for optional use to prevent accidental or un-authorized tampering.
Single or dual timer mode options.
User programmable illumination time of up to 1 to 12 hours or dusk-to-dawn setting.
User or installer can set the control module to run from dusk and then shut off after a certain amount of hours. For example from dusk for 4 hours then switch off, or run from dusk for 6 hours then switch off.
The module can also be programmed to switch on at dusk for a chosen amount of hours then switch off, then switch back on a chosen number of hours before dawn.
Instructions are supplied should the user or installer need to program or re-program the module*.

Solar Panel
Three, high quality, 7 watt solar panels discretely built flush into the top of the fixture.
One solar panel is fitted on 3 out of 4 sides.
Total solar panel wattage is 21 watts.
Direct the fixture and secure it on the top of the pole so that the 3 solar panels face East, South and West.

Installation
Lamp should be installed with the three solar panels facing East, South, and West.
Access panel should be faced North.
Pole anchor kit is included for setting into new wet concrete.
Alternatively, the pole could be bolted to an existing concrete pad using appropriate bolts (not included).

Remarks
 

Two year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.

Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.

The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.

* View our Terms, Conditions and Polices (including our Returns Policy) for further information.

Solar Lights Data
PriceFrom $999.99
Lumen Output500 to 1,000 Lumens
Approximate Illumination TimeTypically dusk to dawn (subject to LED bulb choice)
Approximate Illumination AreaUp to 40' diameter
Programable ControllerYes
Pole Height10'
Pole IncludedYes