The Balmoral double lamp post light is ideal for residential applications. It is an aesthetically pleasing fixture that can offer higher than normal levels of illumination. Supplied complete with a light duty, sectional aluminum pole. Optional additional auxiliary solar panels are also available.
This unique aluminum lamp post has a vandal resistant, clear polycarbonate lampshade that houses the solar panel which is removeable and attaches on the top of the fixture. A higher wattage solar panel is available and auxilliary solar panels can also be purchased as an option. The lampshade section is about 26" high and about 14" diameter, and contains 51 LEDs. A rechargeable battery is supplied and housed within each fixture. The batteries are removeable and replaceable (when required). The fixtures come complete with a charge control and detection for automatical operation at dusk. The lampshades are about 24" high and about 13" diameter, and the total height of the lamp post is 11.5’. The lampshade contains 51 LED bulbs which never need replacing that provides equal to about 75 watts of conventional lighting. When installed in a completely dark location the light spread can be seen for several feet around the lamp post. Installation is easy as this lamp post will simply bolt or screw down onto any solid, horizontal surface. We offer an optional auxiliary solar panel kit for northern climates- see product code SP01. We also offer other matching 'Balmoral' lamp post lights, wall lanterns, and column lights in the same 'Balmoral' series. Color of product is black. Color of light output is white.
Perfect for entrance areas, driveways, walkways, open areas etc. Suitable for residential applications and low wind environments. For commercial use and public areas you should consider our PO11 model which is supplied with a heavy duty steel pole.
Typically dusk to dawn illumination.
Automatic dusk-to-dawn operation.
Discrete on/off switch for manual over-ride.
Aluminum construction with polycarbonate lampshade.
Black colored finish.
LED power consumption is approx. 4 Watts per lamp.
I.P. 65 rating.
Concave upper reflector and convex lower reflector within the lampshade housing, to enhance illumination output.
Each lamp contains 51 super bright, high output LED bulbs.
Light produces 308 lumens.
Light output is white through clear, vandal resistant, polycarbonate lampshade.
Suitable for residential applications. For commercial use and public areas you might want to consider our PO11 model which is supplied with a heavy duty steel pole.
Each lamp section stands approximately 26" (66cm) high.
The clear polycarbonate lampshade section alone is approximately 14” (36cm) diameter (at its widest (top)) and approximately 11" (28cm) high.
Light output is equal to approximately 75 watts of incandescent lighting for each lamp.
Each lamp includes a 12 Volt 9 Amp/Hr rechargeable battery (replaceable) inside the bottom of the lampshade.
Life expectancy of batteries is around 2-3 years.
Supplied with a light duty aluminum pole with a matt black powder coated finish. Ideal for residential use. Not suitable for commercial applications, public areas etc.
For medium to high wind locations, commercial use and/or public areas consider the PO11 model which is supplied with a 10' heavy duty steel pole instead.
Supplied in sections which simply fix together in minutes.
Pole height alone, is approx. 10' (3 meters).
Entire lamp post (pole and lampshade) stands approximately 12’ (285cm) high.
Holes are pre-drilled into the pedestal base for screw or bolt down fixing. The pre-drilled holes are approx. 1/2" (2cm) diameter.
The hexagonal pedestal base has a footprint of approximately 10" x 10" (25cm x 25cm).
High quality, discrete, integral, solar panel fixed flush into the top of each lampshade.
Optional additional panels may be purchased for boosted solar power (see SP02).
For use in dark locations at night time.
Anchor bolts are included.
Two year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.