For customers wanting more illumination this 108 LED sign light is ideal. It's a heavy duty, commercial grade fixture supplied with a solar panel of your choice. Perfect for lighting up small to medium sized signs. Prices from $299.99.
This heavy duty sign light has 108 Cree® LEDs that provide a total of 864 lumens, equal to approximately 100-150 Watts of light, typically illuminating dusk till dawn in ideal conditions. The light has an on/off switch, which when in the on position automatically activates at dusk and turns off at sunrise. This kit also consists of your choice of a 10, 14, or 20 Watt aluminum framed solar panel that can be installed up to 9 feet away from the lamp. Attached to the light fixture and solar panel are u-shaped swivel brackets to allow installation on to any solid flat surface. Additional fixtures can be purchased for pole mounting the solar panel and/or the light (FL12 and/or FL13). This light can illuminate a sign up to 10' x 8' (3.5m x 2.5m).
Ideal for lighting up signs, notice boards, or any other type of sign. Perfect for use where electricity is unavailable such as in rural locations. May be used for permanent or temporary installation.
Selecting a Solar Panel
We offer a 10 Watt, 14 Watt or 20 Watt solar panel with this product. The higher the wattage of the solar panel, the more likely you are to get the maximum illumination time. A higher wattage panel does not extend the maximum amount of time the light will stay on for, and it will not make the light brighter. Higher wattage solar panels are also better for locations where there is limited sunshine. Select a lower wattage solar panel for applications where illumination duration is not critical or where the light will only be used upon demand or for less lengthy duration.
108 Cree® LEDs providing approximately 864 lumens, equivalent to approx. 100-150 Watts of incandescent light.
Typically operates dusk till dawn, subject to the solar panel wattage selected.
Should be suitable for illuminating a sign up to 10’ x 8’ (2m x 2.5m).
Black colored finish light fixture.
Color of light output is white.
Heavy duty, weatherproof lamp head (adjustable tilt for accurate aiming).
On/off mode switch on main body.
Built-in light sensor for automatic night time operation. On at dusk, off at dawn.
Light sensor has a several second start/stop delay to help prevent false on/off illumination.
The lamp is supplied with a tilting U shape mounting bracket.
Fixture dimensions (main body) approx. 11" x 8" x 6.5" (28cm x 20cm x 17cm) (LxWxH).
Wall bracket (supplied attached to the lamp) is approx. 8"x1" (20cm x 2.5cm) (LxW) and has 3 holes pre-drilled to allow fixing.
Integral high capacity 12 volt 6Ah lithium rechargeable battery (replaceable).
Battery included and is pre-installed inside the main body.
Normal operating range is -20 deg. C to + 60 deg. C.
Typically about 4-5 hours of full, direct daily sunshine is required to fully charge battery, subject to the solar panel wattage selected.
Supplied with either a 10 Watt, 14 Watt or a 20 Watt solar panel.
The 20 Watt solar panel may be supplied as two 10 Watt solar panels wired together.
High quality, aluminum framed, solar panel fitted with approximately 9’ (3m) of cable/wire.
Each solar panel is fitted with a fold-out U shape bracket ready for installation.
10 Watt solar panel dimensions approx. 14x11.5"x1" (36cm x 29cm x 2.5cm) (LxWxD).
14 Watt solar panel dimensions approx. 14.5"x14"x1" (37cm x 36cm x 2.5cm) (LxWxD).
20 Watt solar panel dimensions approx. 22.5"x14"x1" (57cm x 36 cm x 2.5cm) (LxWxD).
Easy to install almost anywhere.
May be pole mounted with use of optional attachment kits, wall mounted, or ground mounted.
For uplighting from the ground, for sign lighting we recommend fixing to a small, short wooden post (not included).
Use FL12 light clamp kit to mount the light fixture to a pole.
Use FL13 solar panel clamp kit to mount the solar panel to a pole.
Two year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
30 day 'no hassle' returns (refund or exchange on new, unused/uninstalled products)*.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.