This compact, solar powered, sound sensor light fixture will illuminate throughout the night at a reduced level, and switch to full brightness when sound is detected within its detection range. The light fixture can simply attach to almost any vertical surface.
This solar powered LED light fixture is unique in that it will come on at dusk automtically and illuminate at 33% brighntess typically until dawn. It will switch to 100% brightness if it detects sound within its detection range (of about 8' (2.5 meters)). Once activated, and if there is no more sound it will revert back to 33% brighntess mode after 30 seconds. The light fixture is easy to install. It can simply attach to a wall, the side of a building, fence post, shed, etc. Color of fixture is silver and white. Color of light output is white.
Used for security lighting near doors, porches, entrance areas, storage areas, alley ways, or any other related application.
Fixture contains 16 white LEDs.
Light output is 100 Lumens.
The LEDs will illuminate at night time at 33% brightness typically until dawn.
The LEDs will switch to 100% brighntess if sound is detected within its range.
The LEDs will stay on maximum brightness for 30 seconds after being activated.
If there is no further sound activations the LEDs will revert to 33% brightness.
Detects sound up to 8' away (2.5 meters).
On/off switch for transporting and storage.
Contains Lithium 3.7v 800mah rechargeable battery (pre-installed).
Fixture dimensions are approx. 5" x 3 5/8" x 3" (13cm x 8.5cm x 8cm) (LxWxH)
One year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
30 day 'no hassle' returns (refund or exchange on new, unused/uninstalled products)*.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.