This unique solar powered motion sensor light will illuminate throughout the night at 33% brightness, and switch to full brightness when motion or activity is detected. The light fixture can simply attach to a wall, the side of a building, fence post, or shed and can illuminate up to a 10' x 10' area.
This light fixture is fitted with 4 super bright white LEDs that provide 300 Lumens in full brightness mode. The LEDs point up toward the reflective underside of the lamp, which disburses the light below and out to an area up to about 10' x 10'. The LEDs automatically illuminate at dusk in 33% brightness mode typically until dawn. It switches to full brightness when motion or activity is detected within the motion sensor range. Once activity in the area cease the LEDs will stay on for 30 seconds and then revert to 33% brightness mode again. The solar panel is discretely mounted to the top of the light fixture, and the motion sensor is installed on the underside of the lamp. Color of the fixture is white and silver. Color of light output is white.
Used for security lighting near entrance areas, storage areas, alley ways, or any other related application.
Fixture contains 4 bright white LEDs.
Light output is 300 Lumens.
The LEDs will illuminate at night time at 33% brightness typically until dawn.
The LEDs increase to full brightness when motion or activity is detected within range.
Once activity ceases the LEDs will stay on for 30 seconds and the revert to 33% brighntess mode.
Detects motion up to about 10' away (3 meters).
On/off switch for transporting and storage.
Contains Lithium 3.7v 4000mah rechargeable battery (pre-installed).
Fixture dimensions are approx. 11" x 18.25" x 8" (28cm x 18.5cm x 20.5cm) (LxWxH).
One year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
30 day 'no hassle' returns (refund or exchange on new, unused/uninstalled products)*.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.