This very high quality area light is easy to install and can be surface mounted or pole mounted. It is fitted with 64 super bright SMD/LED bulbs. Heavy duty all metal construction. For residential or commerical use. Light will illuminate at 33% power, once activated the light will switch to full power for 1 minute.
This compact security light features a metal casing with solar panel, lithium battery, and LED luminaire all in one unit. Passive infra-red motion sensor detects persons up to 25' (8 metre) range with up to 140 degree coverage. Can be wall, post or pole mounted (metal brackets included). The fixture contains 64 LEDs with the light output of approx. 300 lumens. A light such as this can enhance security and help deter intruders in a residential or commercial environment. Color of fixture is black. Color of light output is white.
Use it for security lighting in yards, porches, patios, driveways, near entrance areas, storage areas, alley ways, small parking lots and many other applications.
The light will illuminate at 33% power, and will turn to full power for 1 minute once motion is detected.
Light output is approx. 300 Lumens.
Equivalent to approx. 50W of incandescent lighting.
Passive infra-red motion sensor/detector.
Detects motion up to 25' (8m) away (subject to mounting height).
Detection angle is up to approx. 140 degrees.
Up to 50 activations each night from a full charge.
Color of light output is white.
Fitting contains 64 LEDs.
Integral high capacity 7.4 volt 2 A/hr lithium (Li-Ion) rechargeable battery.
High quality 3 watt amorphous silicone solar panel.
Product dimensions are 14" x 8.5" x 1.5" (36cm x 21.5cm x 4cm).
Finish is white or black.
Easy to install almost anywhere such as a wall, post, pole etc.
Brackets for wall mounting or pole mounting are included.
Solar panel is best fixed facing South (otherwise East or West).
Recommended mounting height 6' to 12' (2m to 4m).
One year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
30 day 'no hassle' returns (refund or exchange on new, unused/uninstalled products)*.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.