This solar street light is available with a 20 Watt (2304 Lumen) LED lamp. Sold as a complete system. This pole light system includes a powerful 288 LED floodlight, solar panel, battery box, batteries, 10' or 15' pole and all necessary hardware. Can be set for dusk to dawn or to switch off after a pre-set amount of hours. Choice of a one or two lamp system. Price from $1,699.99.
This product is perfect for lighting up smaller areas up to about 80' x 80'. The entire system is plug & play for easy installation. The floodlight fixture is fitted with 288 Cree® SMD/LEDs providing 2304 Lumens. This system is supplied complete with a metal lockable battery box, two 12 volt SLA rechargeable batteries, a 70 Watt solar panel, a 10' or 15' steel, powder coated pole, rebar anchor kit and hardware to allow the entire system to be fitted on the top of the pole. The floodlight can be positioned at any point on the pole and has angle adjustment to enable the desired lighting pattern. Light output is equal to about 300 watts of incandescent lighting. Fully automatic activation (on at dusk and off at dawn). Programmable timed setting options are also included with allow illumination from dusk for a pre-set amount of hours (e.g. on at dusk for 4 hours, on at dusk for 6 hours, on at dusk for 8 hours etc.). Several programmable timed options are available. An additional 288 LED light fixture can be added to this system as an option and when dusk to dawn lighting is not required. When using two lamps the system can operate for up to 6 hours maximum. This system can be supplied with a manual on/off switch instead of the automatic on at dusk ability. It can also be supplied with a remote control on/off switch instead of the automatic on at dusk facility. Both of these features are optional extras and are available upon request. The steel pole is supplied with steel rebar and anchor bolts for installation into wet concrete or you can use your own expanding anchor bolts and bolt it onto an existing concrete pad. Color of fixture and pole is black. Color of other parts of the system are gray. Color of light output is white.
This area light can be used to light up small streets, driveways, sports courts, riding arenas, courtyards, parking lots, outdoor malls, parks, public spaces, open areas and similar applications. It can be used for residential or commercial applications.
How to Order
We do not accept credit card payments for this product and for this value. Payment would be via check or bank wire transfer (T/T payment). All orders must be placed in writing (by mail, fax or email) and must include all billing and shipping details, the product number and quantity required. Once we receive your written order or purchase order you will be supplied with a pro-forma invoice which you can check to make sure all the information is correct. You will then be required to make payment, in full, against the pro-forma invoice. Your order will ship only when payment has been received and confirmed cleared. A bank wire transfer is the fastest and easiest way to make payment. Most street light shipments are shipped out from our Florida warehouse via UPS Freight with transit time of typically 1-6 business days (from date of dispatch), subject to the delivery address. Shipments outside the USA may take longer.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Typically illuminates dusk to dawn.
Can illuminate an area up to 80' x 80'.
Steel powder coated hardware kit is included for attachment directly to the pole.
The hardware kit is supplied in sections for easy assembly.
The hardware kit will allow the battery box, solar panel and floodlight fixture to attach to form one system.
System includes one heavy duty, weatherproof floodlight fixture.
Optionally, an additional 288 LED light fixture may be added where illumination time of no more than 6 hours is required.
288 hyper- bright Cree® SMD/LED's providing approx. 300 watts of incandescent light.
Each SMD/LED provides 8 Lumens at source. Total 2304 Lumens.
The weather resistant floodlight has approx. 48' of pre-wired cable which is pre-plugged ready for easy connection to the battery box.
The floodlight fixture is weather rated to I.P 65.
Black colored finish of fixture.
The fixture is supplied with a U shape mounting bracket which will also allow for vertical adjustment of the light beam spread.
The floodlight fixture hardware may be positioned at any point on the pole above or below the hardware kit.
Product dimensions (main floodlight body) approx. 11" x 12" x 4" (LxWxD).
Post / Pole
The 10' and 15' pole is made of galvanized steel and supplied with a flat black finish.
The 20' pole is made of galvanized steel and supplied with a satin gray finish.
The 10' (3 meter) pole is approximately 9.5' (285cm) high and has a welded base plate of approximately 1/3" (8mm) thick and approximately 10" x 10" (25cm x 25cm) square.
The 15' (4.5 meter) pole is approximately 14' 9" (435cm) high and has a welded base plate of approximately 1/3" (8mm) thick and approximately 10" x 10" (25cm x 25cm) square.
The 10' and 15' pole base has four pre-drilled elongated holes 3/4" wide.
The 10' and 15' pole is approximately 3" (76mm) diameter (O.D.) at the top and approximately 4.5" (115mm) diameter at the base.
The 10' and 15' poles are supplied with a rebar/anchor kit is included for installation into wet concrete with nuts, bolts and washers.
The 10' and 15' poles can be fixed to an existing concrete pad using suitable expanding anchor bolts (not included).
24 volt dc system.
Two, high capacity 12 volt, 32 Amp-Hr sealed lead acid batteries are supplied.
Batteries must be connected together in series.
A remote battery box is supplied to accommodate the batteries.
The battery box has a hinged lid which is lockable (padlock not included).
The battery box has an integral battery shelf and also houses the PCB controller.
The battery box also has a receptacle (socket) for the sign light fixture to be connected.
The compact control module has LED indicators to display status, and houses connections for solar panel, batteries, and the lamp.
Accepts and controls GEL, AGM and sealed lead acid type (VRLA) batteries.
Low voltage disconnect regulated by state of charge or voltage.
Detects daytime and night time conditions via the solar panel.
Automatic adaption to ambient temperature conditions.
Protection rating I.P.22
User programmable illumination time of up to 1 to 12 hours or dusk-to-dawn setting (where conditions permit).
Default setting is typically dusk to dawn.
User or installer can set the control module to run from dusk and then shut off after a certain amount of hours.
For example from dusk for 4 hours then switch off, or run from dusk for 6 hours then switch off.
Instructions are supplied should the user or installer need to program or re-program the module*.
Aluminum framed 70 watt solar panel fitted with approximately 18' of cable/cord.
Two special mounting frames are included to allow the solar panel to attach to a vertical or horizontal surface with two hole pre-drilled into each section of the frame.
The hardware kit will allow the solar panel to be adjusted to a variety of different angles to suit the geographic location of the site.
70w solar panel dimensions approx. 35" x 26" x 2" (LxWxD). Size may vary depending upon solar panel wattage.
Installation guide included.
Upon curbside delivery, installation is entirely at the risk of the customer and/or the customer's appointed installer.
Subject to warranty registration, a limited 20 year solar panel warranty applies and a limited 5 year warranty on all other components (excluding batteries). Battery warranty (if applicable) is with the battery manufacturer.* Warranty registration is required (after purchase), otherwise a standard 30 day limited warranty will apply. After making your purchase, go to www.solarilluminations.com/registration to register your warranty.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.