This all-in-one solar street light is available with a 18 Watt (2016 Lumen) LED lamp. Sold as a complete system. This LED street light is unique and exclusive. This shoe-box style system is renowned for its high wind resistance. Made from stainless steel it's vandal resistant and highly durable so it's great for marine environments. Perfect for small streets, parking lots, walkways, marinas, public areas etc.
The street light’s all stainless steel construction sets it apart from all other solar street lights in its class. Illumination time is generally from dusk to dawn depending upon being in a suitable geographic location with optimum conditions etc. Where dusk to dawn lighting conditions do not permit or when not required, the system can be programmed to switch on at dusk and operate for up to a selected amount of hours (subject to location etc.). For example on at dusk and then off after 6 hours. If required, a dual time controller is available as an option, at extra cost. The 'shoe-box' style light head is fitted with 336 LED's which have a typical lifespan of approximately 100,000 hours (about 22 years). The LED lamp provides approximately 2016 Lumens. The all in one lamp unit attaches directly to the top of the pole. The 13' pole has an integral base which can be bolted directly to a level, solid surface. A battery box is built into the lamp head unit to facilitate the rechargeable battery. The 50w solar panel is built neatly into the top of the lamp unit creating a "shoebox" style design. Light output is equal to approximately 200-250 Watts of conventional incandescent lighting. It can be supplied with white, warm white or cool white LEDs. It can also be supplied fitted with amber or orange colored LEDs so that it is "turtle friendly". This makes this street light ideal for beach and island locations where "turtle friendly" lighting is a requirement. The system is supplied complete.
This solar powered street light is suitable for the illumination of small streets, parking lots, construction sites, walkways, loading docks, parks, public areas, communities and open areas etc. Great for marine locations, boat docks and turtle friendly lighting applications.
How to Order
We do not accept credit card payments for this product and for this value. Payment would be via check or bank wire transfer (T/T payment). All orders must be placed in writing (by mail, fax or email) and must include all billing and shipping details, the product number and quantity required. Once we receive your written order or purchase order you will be supplied with a pro-forma invoice which you can check to make sure all the information is correct. You will then be required to make payment, in full, against the pro-forma invoice. Your order will ship only when payment has been received and confirmed cleared. A bank wire transfer is the fastest and easiest way to make payment. Most street light shipments are shipped out from our Florida warehouse via UPS Freight with transit time of typically 1-6 business days (from date of dispatch), subject to the delivery address. Shipments outside the USA may take longer.
Quantity discounts are:
10-19 Units ... Less 5%
20-49 Units ... Less 10%
50-99 Units ... Less 15%
100-499 Units ... Less 20%
500-999 Units ... Less 25%
1000+ Units ... Less 30%
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Operating voltage is 12v dc.
Special control system to prevent over-charging and over-discharging.
Typically dusk to dawn illumination (in the most favorable locations) or timed mode lighting.
Polished stainless steel material and construction.
Shoebox style lamp head unit offering high wind resistance up to 150mph.
Fitted with 336 Cree® LED's.
All LED's are white with a color temperature of around 5500~6000k
Warm white, cool white and other LED color temperatures possible, via special order only and at extra cost.
Amber and orange LEDs are available for turtle friendly lighting applications.
The 336 LED lamp provides 2016 Lumens of light output (fitted with white LEDs).
Using a 13' (4 meter) pole, average light pattern will provide approximately 30 Lux (Lumens per square meter) or 2.7 fc/ftc.
Approximately 7-13 Lux is achieved at about 13' (4 Meters) away, e.g. at the ground within the general illumination area.
Polarity protected circuitry.
Power consumption at 12v DC is 1.5A / 18 Watts.
LED life is typically 100,000 hours or equal to about 22 years.
No bulb changes unlike other street lights.
Removable LED circuit board with easy plug-in connections.
Integral battery box containing a 12v sealed lead acid Gel type, maintenance free, rechargeable battery.
Stainless steel construction.
Natural stainless steel finish.
Custom colors by special order only.
One 12 Volt sealed lead acid or GEL type battery is required (included).
Battery capacity is subject to the specification of the system.
Battery capacity is typically 55 or 79 Amp/Hour. Battery included.
Battery type is rechargeable, maintenance free, AGM or GEL type.
Battery dimensions vary subject to battery capacity. Battery weight will vary subject to battery capacity.
Typical battery life is approximately 5 years subject to environmental factors.
Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Periodic charging is always recommended when a product is not being used or when the solar panel is disconnected.
This system includes a programmable control module and regulates and manages the solar panel power, battery power and illumination timer.
The compact control module has LED indicators to display status, input connections for solar panel and batteries and output connections for the lamp.
Push button programming.
Accepts and controls GEL, AGM and sealed lead acid type (VRLA) batteries.
Low voltage disconnect regulated by state of charge or voltage.
Detects daytime and night time conditions via the solar panel.
Automatic adaption to ambient temperature conditions.
Safety fetaures for short circuit and reverse polarity protection of battery and lamp inputs.
Automatic voltage recognition (12v or 24v).
Float voltage for 12v system is 13.7v dc and for 24v system is 27.4v dc.
Low voltage disconnect for 12v system is 11.4 ~ 11.9v dc or for 24v system is 22.8 ~ 23.8v dc.
Reconnect voltage for 12v system is 12.8v dc or for 24v system is 25.6v dc.
Dimensions approx. 11 cm x 10 cm x 4 cm (4" x 4" x 1.5") LxWxD.
Ambient temperature range -40 deg C ~ +50 deg C (-40 deg F ~ +122 deg F).
Protection rating I.P.22
Programmable lock-out feature for optional use to prevent accidental or unauthorised tampering.
User programmable illumination time of up to 1 to 12 hours or dusk-to-dawn setting (where conditions permit).
Default setting is typically dusk to dawn.
User or installer can set the control module to run from dusk and then shut off after a certain amount of hours.
For example from dusk for 4 hours then switch off, or run from dusk for 6 hours then switch off.
Instructions are supplied should the user or installer need to program or re-program the module*.
The system can be supplied with a MPPT charge controller as an option extra, at additional cost.
An MPPT controller is about 30% more efficient and offers the ability to control the light with one or two timed modes as well as a dusk to dawn mode.
Highly efficient polycrystalline solar panel.
Stainless steel frame with anti-aging and encapsulated.
The solar panel is built into the top of the lamp head unit.
Low reflecting tempered glass.
Solar panel is 50 Watts.
Solar panel typical voltage is 17v DC at 2.9A.
Typical solar panel life is approximately 20-25 years subject to environmental factors.
Due to the horizontal orientation of the solar panel, and its wattage, a good to high level of insolation would be required for optimum performance.
Please call us to determine if you location is suitable.
This system must not be installed in a location that is shaded or part shaded.
An additional 40W solar panel can be added to this system as an optiona item, at extra cost.
By adding an extra solar panel and pole mount hardware the charging ability can be greatly increased and therefore improve the performance of the system.
Strong, durable steel pole wrapped in stainless steel.
High wind resistancy up to 150mph.
Base plate welded to bottom of pole to enable secure installation.
Fixing bolts are included.
Two templates for setting the fixing bolts into new, wet concrete are included.
The templates for aligning the anchors are approx. 12.5" x 12.5" (320mm x 320mm).
The bolt pattern (diagonal distance from one hole center to another) is approx. 12.75" (323mm).
The 4 pre-drilled holes on each template are approx. 3/4" (20mm) diameter.
Typically at least 1 cubic yard of concrete is required (3' x 3' x 3').
Pole height is 13' (4 meters).
Natural stainless steel finish.
Custom heights and colors are available by special order, at extra cost.
Typically the pole requires a concrete foundation of approximately 1 cubic yard (3' x 3' x 3'). The location, wind factor and ground condition will affect the size of the foundation required.
Installation instructions are supplied.
Connection wiring between the battery box, solar panel and lamp unit is included.
Installation guide included.
Upon curbside delivery, installation is entirely at the risk of the customer and/or the customer's appointed installer.
Two year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.