This lamp post is an addition to our "Regency" series, and features an all aluminum construction with a glass lampshade. The light fixture contains 20 LED's, and is equal to about 15-20 watts of conventional lighting. The lamp post is simply bolted down to a solid level surface. Two color choices are available.
This traditional styled lamp post is stands about 7' tall, and is a great choice for those looking for a decorative lantern. The fixture includes four solar panels discretely built into the top of the lampshade. This light contains 20 LEDs and provides an output of approximately 15-20 watts. The light will illuminate at dusk, and run for up to 6 hours each night. The lamp post base will simply bolt down onto a solid surface. Optional color choice of black or white. Color of the light output is white.
Perfect for pathways, driveways, entrances, patios, decks etc.
Up to 6 hours of illumination at night in optimum conditions.
Choose from either a black or white (matt) painted finish.
Light will automatically illuminate at dusk.
On/off switch for manual over-ride.
All aluminum construction with clear glass lampshade.
Gross weight is approximately 28 lbs.
20 Super bright LEDs.
Light output is white.
Light output is approximately 15-20 watts.
Lampshade section only is approximately 8" x 8" x 8" (20cm x 20cm x 20cm) LxWxD.
Supplied in 4 sections which simply fix together with strong threaded connections.
Complete lamp post with lampshade stands approximately 7' (2.5m) tall.
Includes eight AA size Ni-Mh rechargeable batteries.
Four solar panels are discretely built into the top of the fixture.
Fix to ground or any solid level surface.
Three mounting anchors and bolts are included.
An electric drill with a masonary bit, a wrench, and a screwdriver will be minimum tools required.
Written instructions supplied.
One year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.