This heavy duty fixture clamp attachment kit was designed by us through popular demand. It enables our FL05, FL06, FL09, FL10, and numerous other floodlights to attach directly to a round pole and still allows the floodlight to be adjusted to the desired angle.
This kit consists of a heavy duty steel clamp which is suitable for fixing to a vertical or horizontal surface or to a round pole or post. It can also be used to fix to a square post or pole with suitable mounting footprint. Once secured, this clamp will enable our FL05, FL06, 144 LED, 288 LED and 504 LED floodlights to attach to it. The supplied clamp is designed to attach to a pole with the diameter of around up to 4". You can purchase a larger clamp that will accommodate poles up to 5" or 6" in diameter. The bracket attaches to the pole using two supplied adjustable banding. Installation is easy; slide banding around the pole, and through the bracket, and tighten the banding for a secure fit.The clamp can be directly screwed or bolted to poles with larger diameters. For installation to a vertical or horizontal surface simply discard the banding and screw or bolt the flat side of the mounting plate to your surface. Color of clamp is grey.
Used to mount light fittings on a pole with a diameter up to 4”, 5", or 6". Clamp can be used for FL05, FL06 light fittings, and also 144 LED, 288 LED, and 504 LED lamps.
Manufactured in an ISO9001:2000 'Quality Assured' facility.
Steel clamp attachment kit for FL05, FL06 light fittings, and also 144 LED, 288 LED, and 504 LED lamps.
Grey painted finish.
Easy to install.
Fits almost any round pole or round post from approx. up to 4", 5", or 6" diameter.
Simply clamps and locks around a pole or post.
Can be used without the banding piece to be fixed to almost any flat surface (horizontal or vertical).
Can be attached to a square sided post.
Can be attached to a larger diameter pole or post directly, by removing the banding piece or using bigger banding.
Light fitting mount is on T-bar section and has universal mounting points to accommodate our FL05, FL06, and 144, 288, 504 LED lamps.
Length of the stand-off arm is approx. 17".
Nuts, bolts, and washers included for standard installation.
One year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Minor errors & omissions must be accepted. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.