This basic light bulb kit includes a powerful LED light bulb complete with ES (E26/E27) bulb holder. This system can be programmed to illuminate from dusk to dawn or from dusk for a chosen amount of hours. Choice of LED bulb available.
This economical system comprises of an Edison (E26/E27) bulb holder that will accept a 12V 3W LED light bulb. The bulb holder can be installed within a light fixture such as a post light, wall light or other fixture. This system is designed to typically operate for up to 14 hours each night. The kit is supplied with the light buld and bulb holder, a weather proof battery box, a programmable charge controller, a 20 Watt solar panel, and a 12 Volt rechargeable battery. The battery box is supplied with outlets for the solar panel and light fixtures to plug in to. When the system is connected the light will come on automatically at sunset and will stay illuminated until the set amount of time. The module can be set in numerous options ranging from dusk till dawn, or the light staying on for a set amount of hours after sunset (from 1 to 12 hours). An MPPT charge controller can be purchased as an optional upgrade. The MPPT charge controller can improve charging efficiency by up to 30% and provide more advanced light control settings including dual timer option. The solar panel and light fixtures are supplied with several feet of cable, so they can be mounted away from the battery box if needed. The LED light bulb typically last for up to 20 years so there are no bulb changes. Color of most parts of the system is gray. Color of light output is white or warm white.
Our solar LED light bulb conversion kit is perfect for sites where electricity is no longer available or where it would be too difficult or too costly to install an electric supply. They are also suitable for retro-fit applications where electrically powered fixtures need replacing.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Up to 3 days of autonomy (subject to time length of night time illumination and other factors).
One Edison (ES / E26 / E27) bulb holder is included in this system.
One 12 Volt, 3W LED corn bulb is included (which screws into the bulb holder).
Total 300 lumen (subject to color temperature).
White LED color temperature is approx. 6000-6500k.
The bulb holder is fitted with approximately 18' (5m) of pre-wired cable which is pre-plugged ready for easy connection to the battery box. Additional extension cable is available (upon request) as an option.
The LED light bulb dimensions are approx. 3" long x 1.5" diameter (8cm long x 3cm diameter) excluding the Edison screw section.
One high capacity 12 Volt 12 Amp/Hr sealed lead acid battery is supplied.
Battery type is AGM. Gel battery is available by special order.
A plastic weatherproof battery box is supplied to accommodate the battery.
The battery box has a removable front which is lockable (padlock not included).
The battery box also houses the charge controller controller.
The battery box is approx. 10.5" x 8" x 4.5" (27cm x 20cm x 12cm) LxWxD.
High quality 20 Watt solar panel is included.
Higher powered solar panel options may be available. For help determining whether a solar panel upgrade is necessary, please contact our customer service department.
The solar panel is fitted with approximately 10' (3m) of cable/cord.
Additional cord is available as an optional extra.
The solar panel cord connects directly to the battery box.
The solar panel support is supplied with a fold-out 'U' shape bracket which can be used to mount it to a suitable surface.
The 20W solar panel dimensions approx. 22.5" x 14" x 1" (57cm x 36cm x 3cm) LxWxD.
This system includes a programmable control module which regulates and manages the solar panel power, battery power, and illumination time.
The compact control module has LED indicators to display status, and houses connections for solar panel, batteries, and lamp.
User programmable illumination time of up to 1 to 12 hours or dusk-to-dawn setting (where conditions permit).
User or installer can set the control module to run from dusk and then shut off after a certain amount of hours.
Default setting is typically dusk to dawn.
Instructions are supplied should the user or installer need to program or re-program the module*.
An MMPT charge controller can be purchased as an optional upgrade.
The MPPT charge controller increases charging efficiency by 30% and provides more advanced light control options.
For use in dark locations at night time.
Easy to install.
All components are plug and play.
20 year solar panel warranty, 5 year warranty on all other components (excluding bulb and batteries). Batteries are covered by the manufacturer*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.