Some sign light and billboard light system installations may require one or more of these support arms. It enables the light fitting to be installed a distance away, allowing for a larger illumination distribution. Can be used for mounting on or under billboard catwalks. Sold as a single unit.
This is an optional accessory for many of our sign light and billboard light systems. This steel support arm attaches to the light housing, and to the underside edge of a sign to enable a larger illumination spread. Support arms are sold individually, and additional arms will be required for systems that have more than one light fitting. Color of product is gray.
Enables a light to be mounted a short distance away from the sign face, and allows for a larger light spread. Compatible with FL02, FL04, FL08, FL09,FL10, FL19, FL25, FL26, FL27, FL31, FL32, FL33, FL34, FL35, FL41, FL42, FL43, FL44, FL45, BL01, BL02, BL03, BL04, BL10, BL11, BL12, BL13, BL14, BL15, BL20, BL21, BL22, BL23, and BL24.
Steel support arm is made for use with some FL and all BL series sign light systems.
Compatible with many of our large sign light systems, and billboard systems. See list above for compatible systems.
Support arm is approx. 71" (180cm) long and has a 1.5" x 1.5" (4cm x 4cm) square profile.
The support arm has a flat mounting plate (approx. 5" x 1.5" (13cm x 4cm)) allowing direct attachment to the U shape bracket of the light fitting.
Two U shape clamps are supplied with each long support arm to enable attachment to a surface. Each clamp needs a mounting footprint of approx. 3.5" x 1.5" (9cm x 4cm).
Can be cut down to size, if necessary.
One year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.