This solar street light is available with a pair of either 35 Watt (3,570 Lumen) or 65 Watt (7,140 Lumen) LED lamps. Sold as a complete system. This solar LED street light is offered as a very powerful solution for illuminating streets, roads, trails, etc. Sold without a pole for retrofit applications. Consider product SL36 if a pole is required. Supplied as a complete system. Prices from $3,499.99.
This highly powerful solar street light system is supplied with a choice of either a 35W or 65W LED lamp capable of producing from approximately 3,500 lumens up to 7,140 lumens for each lamp. This makes it one of the most powerful solar powered double lamp fixture of its kind on the market today. The light fixture is fitted with multiple, modular, high output Philips Luxeon® Rebel ES LEDs. It can be supplied with a Type I, II, III, or V lighting distribution pattern. The system is supplied with a metal lockable battery box, which is installed at the bottom of the pole. The battery box houses two large 12V AGM rechargeable batteries and the MPPT charge control module. Solar panel wattage depends on the lamp type selected but ranges from 280W up to 420W total. The solar panels are mounted on the top of the pole. The system is controlled by an MPPT programmable control module. The control module can also be set to run dusk to dawn (subject to model selected), or run for a set number of hours after sunset (from 1 to 12 hours) and has the option of switching on for a chosen amount of hours before dawn. The illumination time may vary depending upon your geographic location. In some locations using a pair of 65w lamps may mean that the system will need to be set for single or dual timed mode (not dusk to dawn). Standard color of light fitting is silver/gray. Custom paint colors and custom LED colors available by special order only. Standard color of light output is white.
It is perfect for lighting up streets, roadways, walkways, sidewalks, parks, open areas, playgrounds, sports arenas, public areas, walkways, HOA communities and sub-developments and such like.
Operating voltage is 24 Volts. DC.
Maximum current 1.62A, 3.01A, 4.63A, 6.44A (subject to model selected).
Power consumption is 35, 65, 100 or 135 Watts (subject to model selected).
Operating temperature -40 deg. C ~ +55 deg. C (-40 deg. F ~ 131 deg. F).
Special control system to prevent over-charging and over-discharging.
Several successive cloudy or alternating overcast days typically will not affect illumination time.
The system (when supplied with a pair of 35W lamps) can operate typically from dusk to dawn or be single or dual timer controlled.
The system (when supplied with a pair of 65W lamps) may be able to operate dusk to dawn (in ideal conditions) or be set to a single timed mode or a dual timed mode (for less favorable geographic locations).
Supplied with two LED luminaires.
Low profile design with minimal wind resistance.
Designed for horizontal and vertical applications.
Features a fully adjustable tenon which can rotate 90 degrees at 15 degree intervals.
Each LED luminaire is configured with one or multiple LED modules.
Each LED module contains 14 LED's.
Each module has gaps to increase thermal dissipation speed.
Can be supplied with a Type I, II, III or V lighting distribution pattern.
The 35 Watt lamp unit is fitted with one module containing 14 high power Philips Luxeon® Rebel ES LEDs.
The 35 Watt lamp is equal to at least a 70 Watt HID lamp.
The 65 Watt lamp unit is fitted with two modules containing 28 high power Philips Luxeon® Rebel ES LEDs.
The 65 Watt lamp is equal to at least a 100 Watt HID lamp.
Choice of LED color temperature (yellow, warm white or white). White is standard.
Yellow is approx. 3800~4100k.
Warm white is approx. 5000~5650k.
White is approx. 5650~6300k.
Lumen tolerance +/- 5%.
The 35 Watt lamp unit provides approx. 3,570 Lumens of light output (with white LEDs).
The 65 Watt lamp unit provides approx. 7,140 Lumens of light output (with white LEDs).
Polarity protected circuitry.
LED life is typically up to 100,000 hours or equal to about 22 years.
No bulb changes unlike incandescent street lights.
Fixture attaches to the lamp support arm which in turn attaches to the pole.
Anodized aluminum construction with toughened glass.
Silver/gray color anti-static powder coated finish.
Black and custom colors by special order only.
Stainless steel hardware.
IP66 weather rating.
LED beam angle is 140 deg. (horizontal) x 65 deg. (vertical).
CRI is >75
The light fixture incorporates a high efficiency 24v-24v dc LED driver.
The LED driver efficiency is over 90% and is I.P. 65 rated.
The LED driver has short circuit, over current, over voltage and over temperature protection.
Certifications CE, FCC, RoHS, CB, TUV, CCC, CQC. UL listed, cULus, ETL, DLC, cETLus, Designlights Consortium, LM79, LM80.
The 35 Watt fixture is approx. 17" x 12.5" x 5.5" (43cm x 31cm x 13cm) L x W x D.
The 65 Watt fixture is approx. 20" x 12.5" x 5.5" (50cm x 31cm x 13cm) L x W x D.
The 35 Watt fixture weighs approx. 11.5 lbs (5.3 kgs).
The 65 Watt fixture weighs approx. 13.5 lbs (6.1 kgs).
Tenon internal diameter is approx. 2.4" (6cm).
Unique adjustable tenon allows horizontal adjustments from 0-15 degrees and vertical adjustments from 0-15 degrees.
The tenon can be set in a horizontal or vertical position to allow for different support arm angles and pole types.
Certifications, listings and approvals: UL, CE, FCC, RoHS, CB, TUV, CCC, CQC, cULus, ETL, DLC, cETLus, Designlights Consortium, LM79, LM80.
24v DC systems use two 12v sealed lead acid, AGM or GEL type rechargeable batteries.
Battery type is deep cycle, marine grade.
Batteries are made in the USA.
With a pair of 35 Watt light fixtures the battery capacity is 92 Amp/Hour (each battery).
With a pair of 65 Watt light fixtures the battery capacity is 198 Amp/Hour (each battery).
The 92 Amp/Hour battery dimensions are approx. 13" x 6.5" x 9.5" (33cm x 7cm x 24cm) LxWxD.
The 92 Amp/Hour battery weighs approx. 63 lbs (28.5 kgs).
The 198 Amp/Hour battery dimensions are approx. 21" x 9" x 10" (53cm x 22cm x 25cm) LxWxD.
The 198 Amp/Hour battery weighs approx. 129 lbs (65 kgs).
Typical battery life is approximately 5 years subject to environmental factors.
Please note, if you do not install or use this product for several months the battery may discharge naturally on its own.
By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge.
Periodic charging is always recommended when a product is not being used or when the solar panel is disconnected.
Higher capacity batteries may be required for more demanding applications and/or locations with lower insolation.
A pair of galvanized steel arms are supplied to accommodate the light fixture.
Attaches directly to the street light pole.
A choice of support arm size is available.
Can be attached in any direction and at a choice of height on the pole.
Silver/gray color finish.
Custom colors by special order only.
Galvanized steel lockable battery box will accommodate the rechargeable batteries.
The battery box is to be located at the base of the pole.
Padlock not included.
The battery box has pre-drilled holes to enable secure installation to a concrete pad.
Silver/gray color finish.
Custom colors by special order.
Battery box will fit two 12 volt 92 Amp/Hour, 12 volt 198 Amp/Hour or 12 volt 245 Amp/Hour batteries.
This system includes a MPPT charge controller (programmable control module) which regulates and manages the solar panel power, battery power and illumination timer.
The compact control module has LED indicators to display status, input connections for solar panel and batteries and output connections for the lamp.
Push button programming.
Accepts and controls GEL, AGM and sealed lead acid type (VRLA) batteries.
Low voltage disconnect regulated by state of charge or voltage.
Detects daytime and night time conditions via the solar panel.
Automatic adaption to ambient temperature conditions.
Safety features for short circuit and reverse polarity protection of battery and lamp inputs.
Automatic voltage recognition (12v or 24v).
Float voltage for 12v system is 13.7v dc and for 24v system is 27.4v dc.
Low voltage disconnect for 12v system is 11.4 ~ 11.9v dc or for 24v system is 22.8 ~ 23.8v dc.
Reconnect voltage for 12v system is 12.8v dc or for 24v system is 25.6v dc.
Dimensions approx. 11 cm x 10 cm x 4 cm (4" x 4" x 1.5") LxWxD.
Ambient temperature range -40 deg C ~ +50 deg C (-40 deg F ~ +122 deg F).
Protection rating I.P.22
Single or dual timer mode options.
User programmable illumination time of up to 1 to 12 hours or dusk-to-dawn setting (where conditions permit).
User or installer can set the control module to run from dusk and then shut off after a certain amount of hours. For example from dusk for 4 hours then switch off, or run from dusk for 6 hours then switch off.
The module can also be programmed to switch on at dusk for a chosen amount of hours then switch off, then switch back on a chosen number of hours before dawn.
Instructions are supplied should the user or installer need to program or re-program the module*.
The illumination time may be determined by, and subject to, the specifications of the system and the insolation levels at the installation site.
Highly efficient polycrystalline solar panel.
Aluminum frame with anti-aging and encapsulated.
Low reflecting tempered glass.
With a pair of 35 Watt light fixtures selected, the wattage of solar panel is 280 Watts.
With a pair of 65 Watt light fixtures selected, the wattage of solar panel is 420 Watts.
Solar panels are typically supplied in a dual format (2 x 140w = 280w, 2 x 210w = 420w etc.).
Depending upon your geographic location higher wattage solar panels may be required at extra cost.
Typical solar panel life is approximately 20-25 years subject to environmental factors.
The geographic location of the street light may affect the size/wattage of the solar panel required.
The dimensions of the solar panel can vary and is subject to the wattage and format supplied.
The solar panel(s) are supplied with steel support frame and T bar mounting system with tenon that allows direct attachment to the top of the pole.
The mounting systems allows the solar panel(s) to be tilted to an appropriate angle determined by the geographic location of the installation site.
The solar panel(s) can be rotated (ideally to a southerly unobstructed view of the sky).
A higher wattage solar panel may be required for more demanding applications and/or locations with lower insolation.
Hardware & Connections
All necessary hardware is included.
Interconnecting Cables Connection wiring between the battery box, solar panel and lamp unit is included.
Most wiring is pre-installed.
Most connections are plug & play.
Installation guide and instruction manual is included.
Subject to warranty registration, a limited 20 year solar panel warranty applies and a limited 5 year warranty on all other components (excluding batteries). Battery warranty (if applicable) is with the battery manufacturer.* Warranty registration is required (after purchase), otherwise a standard 30 day limited warranty will apply. After making your purchase, go to www.solarilluminations.com/registration to register your warranty.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
The product specifications above should be used as a general guide. We can offer modifications and changes to the specifications of this product if necessary. This may be required to meet your specific needs and/or due to the geographic location of the installation site. In locations where insolation levels are poor or lower than normal, a higher wattage solar panel and larger capacity batteries may be required. We offer product customization. MPPT, dual timer and dimming charge controllers are all available as optional extras. One or more motion sensors can also be added as an optional extra. Other options included UL listed or ETL certified components and the provision of Buy American Act (BAA & ARRA) compliance, if required. Photometric data, 3D renderings and planning of your lighting project is available. Please contact our sales department for more information before making your purchase.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||From 3,570 to 7,140 Lumens (per lamp)|
|Equivalent Incandescent Wattage||Up to 100 watts (HID) per lamp|
|Approximate Illumination Time||Typically dusk to dawn or single/dual timed modes.|
|Approximate Illumination Area||Up to 150' x 100' in one direction and up to 150' x 100' in another direction.|
|Solar Panel Wattage||280 Watts to 420 Watts|