A very compact, neat little solar powered spot light with motion sensor. Dues to its size it can be installed almost anywhere and its solar panel can be positioned nearby at a distance. Great for lighting up a very small area. Choice of colors available.
This is a neat, compact, mini spot light style fixture can be installed quickly and easily almost anywhere. This mini spotlight comes complete with a remote, compact sized Siemens solar panel that has 12’ of cable allowing the solar panel to be remotely sited. All plastic construction therefore no parts to rust. The passive infra-red motion sensor detects persons up to a 25’ range with up to 180 degrees coverage. 'Light-on' time can be adjusted to suit (10 seconds to 4 minutes after last activity detection). Available in either black or white finish. Can be wall, fence or possibly post mounted. It is not powerful enough to light up large areas or illuminate objects or persons at great distance. We offer bigger and brighter solar security floodlights with a motion sensor that are more suitable for those applications (see our SF01 and SF03 products which can also be found in this same category). Typically, in a dark location, one mini spotlight will illuminate an area up to approximately 10’ x 10’ maximum. If you require a floodlight that does not have a motion detector then consider our FL03, FL04, FL05, FL06 or FL07 floodlights instead, which can be found in our 'Floodlights & Sign Lights' category. Colour of product is black or white (make a selection).
This solar mini spot light is ideal for light up small areas, such as around an entrance, front door or back door area, inside a small shed, or perhaps next to a gate, just to name a few examples of typical applications. Perfect for locations where you need just a little light to help out during the hours of darkness.
Passive infra-red motion sensor/detector (adjustable tilt/swivel for accurate aiming).
Up to approximately 180 degree / 25’ (8m) detection range.
On/off mode switch on side of main spot light fitting.
Adjustable 'light-on' duration/timer setting (10 seconds to 4 minutes after last activity detection).
Adjustable sensitivity setting dial.
Adjustable lux setting dial.
All plastic construction, no parts to rust.
Normal operating range is 0 deg. C to 60 deg. C.
Provides illumination of a dark area up to approx. 10’ x 10’ (3m x 3m) maximum.
Choice of a black or white.
This motion sensor security light is not designed to be used for continuous illumination. Its purpose is to illuminate for short periods upon activation of the motion sensor.
This product is suitable for very local, close proximity lighting applications and not suitable for distance lighting or large area lighting.
Single, super bright LED bulb.
Light output approx. 4-5 watts.
Color of light output is white.
Floodlight main body is approximately 5” x 3” x 1.5” (12cm x 8cm x 4cm) (LxWxD) although just two screws or bolts are required to secure this fixture to almost any vertical surface.
The floodlight head (lampshade/lens section) is approximately 3” (7.5cm) diameter.
3 integral AA size Ni-Cad 1.2v 600mA rechargeable batteries supplied (replaceable).
High quality Siemens 0.5 watt solar panel (with a mounting plate and adjustable tilt position).
Detachable solar panel can be separated up to approximately 12’ away with cable/cord supplied.
High quality Siemens solar panel with adjustable tilt bracket for wall, fence post, fascia or roof mounting etc.
Cable/cord to solar panel has jack plug to enable easy connection/disconnection to main light fixture and for ease of installation.
Solar panel is approximately 5” x 4” (13cm x 10cm) (LxW) with the attached mounting plate having a footprint of approx. 6” x 3” (15cm x 8xm) (LxW).
Solar panel best fixed facing South (otherwise East or West).
Can be wall mounted with screws provided.
Fitting can be fixed to almost any vertical surface such as a wall, fence, post or pole. Can also be fixed to underside of a roof soffit.
Easy to install.
One year warranty*.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
30 day 'no hassle' returns (refund or exchange on new, unused/uninstalled products)*.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.