This solar billboard light system consists of a complete system with four powerful 144 LED lamps capable of providing 1152 Lumens per lamp. Specifically for billboard lighting applications where illumination is required for no more than 8 hours each night.
This system is specifically designed for the billboard industry. It is comprised of 4 lamps each containing 144 hyper-bright Cree® SMDs which provide a light output of 1152 Lumens each fixture. The system is designed to illuminate for a maximum of 8 hours each night. The kit is supplied with the light fixtures, a metal battery box, a MPPT charge controller, a 100 Watt solar panel with mounting brackets, and two 12 Volt rechargeable batteries. For installations in locations that experience harsh winter weather, or low sun levels, a higher powered solar panel may be required. The lockable battery box comes with an on/off switch and outlets for the solar panel and four lamps to plug in to. When the system is in the on position the light will activate automatically at sunset and will stay illuminated until the set amount of time. The charge controller can be programmed to illuminate from dusk for 8 hours, or it can use a dual timer option. The dual timer allows the light to activate at dusk and illuminate for X hours, switch off, and then turn back on for X hours prior to sunrise. The solar panel and light fixtures are supplied with several feet of cable, so they can be mounted away from the battery box if needed. Color of light fixture is black. Color of other parts of the system is grey. Color of light output is white.
Perfect for applications that require lighting without any near-by electricity. Suitable for almost any billboard application, single sided, double sided or triangular types. Just be sure to select a system that can properly accommodate your needs and has the light output to cover the size of the billboard you wish to illuminate.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
A maximum of 8 hours of illumination each night.
Up to 24 hours of autonomy subject to time length of night time illumination.
Each light fixture can illuminate a sign up to 13' x 13' (4m x 4m).
System includes four heavy duty, weatherproof sign light heads.
144 hyper- bright Cree® SMD/LED’s providing approx. 200 watts of incandescent light.
Each SMD/LED provides 8 Lumens at source. Total 1152 Lumens.
The weather resistant lamp has approx. 48’ (14m) of pre-wired cable which is pre-plugged ready for easy connection to the battery box.
The light fixture is weather rated to I.P 65.
Fitted with a U shape mounting bracket.
Color of light fixture is black.
Light fixture bracket is approx. 8”x1” (20cm x 2cm) LxW.
Light fixture dimensions approx. 11” x 12” x 4” (28cm x 30cm x 10cm) LxWxD.
24 Volt dc system.
Two high capacity 12 Volt 55 Amp/Hr sealed lead acid batteries are supplied.
Battery type is AGM. Gel battery is available by special order.
Batteries must be connected together in series.
A remote battery box is supplied to accommodate the batteries, and charge controller.
The battery box has a hinged lid which is lockable (padlock not included).
The battery box has an integral battery shelf which houses the programmable control module.
The battery box has a receptacle (socket) for the solar panel, and each light to connect to.
The metal battery box is approx. 22” x 14” x 8” (56cm x 36cm x 20cm) LxWxD.
The battery box has a footprint for installation of approx. 22” x 14” (56cm x 36cm) LxW.
Supplied with a 100 Watt aluminum framed solar panel.
Higher powered solar panel options may be available. For help determining whether a solar panel upgrade is necessary, please contact our customer service department.
Supplied with approximately 17’ (5m) of cable to connect directly to the battery box.
Mounting frames are included to allow the solar panel to attach to a vertical or horizontal surface with two hole pre-drilled into each section of the frame.
100W solar panel dimensions approx. 47.87” x 26.43" x 1.5" (121.6cm x 67.1cm x 3.5cm) LxWxD.
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
The dimming option or any other illumination mode can be used in conjunction with motion activation (where applicable).
Dimming may be at any percentage from 1-99%.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Maximum PV power (12V dc) is 135W at 10A and 200W at 15A.
Maximum PV power (24V dc) is 270W at 10A and 400W at 15A.
Maximum PV open circuit is 75V dc.
Peak efficiency is 98%.
Charge voltage (absorption) is 14.4V dc.
Charge voltage (float) is 18.8V dc.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Low voltage load disconnect at 11.1V dc to 11.8V dc (12v dc system) or 22.2V dc to 23.6V dc (24V dc system) or battery life algorithm.
Low voltage load reconnect at 13.1V dc to 14V dc (12V dc system) or 26.2V dc to 28V dc (24V dc system).
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -22 deg. F (-30 deg. C) to 140 deg. F (+60 deg. C).
Humidity up to 95%, non condensing.
Power terminals are AWG 10 (6mm2).
Protection rating IP22 (connection terminal area).
Weight is 500g (1.1 Lbs).
Dimensions are approx. 4” x 4” x1.5” (10cm x 10cm x 4cm).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
Easy to install. All connections are simply plug & play.
Two special mounting frames are included to allow the solar panel to attach to a vertical or horizontal surface with two hole pre-drilled into each section of the frame.
A pair of triangle shaped support frames are supplied for the solar panel.
For up lighting from the ground, for sign lighting, we recommend fixing to a small, short wooden post (not included).
For attaching the light fitting directly to a round post or round pole we recommend using our clamp attachment kit (product code FL12).
May be wall mounted, possibly fixed to a pole or post or possibly to the ground to a flat, firm surface.
An optional pole mount kit can be purchased (FL40)
An optional support arm can be purchased (FL11)
20 year solar panel warranty, 5 year warranty on all other components (excluding batteries). Batteries are covered by the manufacturer.* Warranty registration is required (after purchase), otherwise a base one year warranty will apply. Go to www.solarilluminations.com/registration to register your warranty.
Lifetime unlimited technical support.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||1152 Lumens per lamp.|
|Approximate Illumination Time||Maximum of 8 hours.|
|Approximate Sign SIze||Up to 13' x 13' (4m x 4m) per lamp.|
|Solar Panel Wattage||100 Watts.|