This system includes three traditional (goose neck) LED sign light fixtures. Perfect for illuminating store front signage, restaurant signs, or other sign lighting applications. Set for dusk to dawn or timed lighting mode. An additional light fixture is available as an option.
1. SOLAR PANEL
2. LED LIGHT FIXTURE
3. BATTERY BOX
5. PROGRAMMABLE CONTROL MODULE
6. SOLAR PANEL SUPPORT BRACKETS
This unique system comprises of three traditional style (goose neck) light fixtures which are each supplied with a super bright LED bulb providing an approximate 60 degree beam spread. An additional light fixture may be added to this system as an option. The lights will automatically activate at dusk will typically run to dawn with three lights in use. For installations in locations that experience harsh winter weather, or low sun levels, a higher powered solar panel and/or an MPPT charge controller may be required. This system is supplied with a PWM programmable charge controller to enable the installer to set the illumination time (typically dusk to dawn or for any other amount of time). Several programmable timed options are available. An MPPT charge controller can be purchased as an optional upgrade. The MPPT charge controller improves solar charging efficiency, and offers addition light control features including a dual timer setting. The kit is supplied with a 70 Watt solar panel which can be installed on the sign structure or nearby. A lockable battery box is included to facilitate the two 12V batteries which is recharged daily via the solar panel. The light fixtures come pre-wired with plenty of cord with simple connections that plug into the battery box. The LEDs in the light fixture typically last for up to 20 years so there are no bulb changes. Color of the lamp is black. Color of other parts of the system are gray. Color of light output is white.
This style of light is perfect for restaurant signs, storefronts, and traditional hanging signs. Our solar LED sign light systems are perfect for sites where electricity is unavailable or where it would be too difficult or too costly to install an electric supply. They are also suitable for retro-fit applications where electrically powered fixtures are being removed in an effort to save money and no longer use the utility supply.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Each lamp can illuminate a sign up to 10' x 10' (3m x 3m).
This system can typically operate from dusk till dawn each night with three lights, and 11 hours with four lights.
Up to 3 days of autonomy (subject to time length of night time illumination and other factors).
Three or four traditional (goose neck) lights are included in this system.
The lights are fitted with a 3 Watt LED bulb which is fitted with 48 SMD/LEDs.
Total 192 Lumens.
LED beam angle is approx. 60 degrees.
LEDs are white.
White LED color temperature is approx. 6000-6500k.
Black colored finish of lamp.
The light can be attached to almost any vertical surface (such as a wall or sign).
The light fixture is supplied with approximately 18' (5.5m) of pre-wired cable which is pre-plugged ready for easy connection to the battery box.
Additional extension cable is available (upon request) as an option.
The length of the arm of the light fixture is 19" (48cm).
The diameter of the base of the light fixture is 5" (12.5cm).
The diameter of the lamp head is 10" (25.5cm).
12 Volt dc system.
Two high capacity 12 Volt 18 Amp-Hr sealed lead acid batteries are supplied.
Battery type is AGM. Gel battery is available by special order.
A metal lockable battery box is supplied to accommodate the batteries.
The battery box has a hinged lid which is lockable (padlock not included).
The battery box has an integral battery shelf and also houses the PCB controller.
The battery box is approx. 13" x 9.75" x 9" (33cm x 24.5cm x 23cm) LxWxD.
High quality aluminium framed 70 Watt solar panel is included.
Higher powered solar panel options may be available. For help determining whether a solar panel upgrade is necessary, please contact our customer service department.
Solar panel is fitted with approximately 18' (5.5m) of cable/cord. Additional cord is available as an optional extra.
The solar panel cord connects directly to the battery box.
The solar panel support is supplied with triangular brackets for mounting.
The 70W solar panel dimensions approx. 32.35" x 26.22" 1.5" LxWxD (89.3cm x 66.8cm x 3.5cm).
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Peak efficiency is 98%.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -22 deg. F (-30 deg. C) to 140 deg. F (+60 deg. C).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
All connections are simply plug & play.
Subject to warranty registration, a limited 20 year solar panel warranty applies and a limited 5 year warranty on all other components (excluding batteries). Battery warranty (if applicable) is with the battery manufacturer.* Warranty registration is required (after purchase), otherwise a standard 30 day limited warranty will apply. After making your purchase, go to www.solarilluminations.com/registration to register your warranty.
Additionally, unlimited, lifetime technical support is available for all warranty registrations.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||192 Lumens per lamp.|
|Approximate Illumination Time||Typically dusk to dawn.|
|Approximate Sign SIze||Up to 10' x 10' (3m x 3m) per lamp.|
|Solar Panel Wattage||From 70 Watts.|