This complete system includes two or three powerful mini flag lights which are ideal for illuminating smaller flag poles typically dusk to dawn.
This flag pole light system comprises of three or four very compact light fixtures containing a single, powerful 10W (900 Lumen) LED providing an approximate 120 degree beam spread. This system is designed to typically operate dusk untill dawn each night using three light fixtures, and up to 10 hours using four. For installations in locations that experience harsh winter weather, or low sun levels, a higher powered solar panel may be required. The kit is supplied with the light fixtures, a metal weather proof battery box, a programmable control module, a 140 Watt solar panel, and a 12 Volt rechargeable battery. The battery box can be locked with a padlock (not supplied), and is fitted with outlets for the lamps and solar panel to easily connect to. An on/off switch is supplied, when left in the on position the system will automatically turn on at sunset and illuminates until the programmed amount of time. The MPPT charge controller provides up to 30% more charging power, and advanced light control options. The solar panel and light fixtures are supplied with several feet of cable so that they can be installed a distance away from the battery box if required. Color of light fixture is gray. Color of other parts of the system is gray. Color of light output is white.
This solar powered fixture is ideal for lighting up flag poles so there is no longer the need to lower your flag at dusk any more. You can install the light and panel at the bottom of the flag pole, or for better results you can purchase our clamp kits to attach the lamp and/or solar panel to the pole, closer to the flag. Perfect for use where electricity is unavailable or too expensive or difficult to install.
Manufactured in an ISO9001:2008 'Quality Assured' facility.
Typically offers dusk to dawn lighting with three light fixtures, or 10 hours with four light fixtures
Each light can light up a flag pole up to 40’ (12m).
Three or four light fixtures are included in this system.
The light is fitted with powerful 10W SMD/LED.
Total 800-950 Lumens per lamp (subject to color temperature).
LED beam angle is approx. 120 degrees.
White LED color temperature is approx. 6000-6500k.
The light is fitted with approximately 18' (5.5m) of pre-wired cable which is pre-plugged ready for easy connection to the battery box. Additional extension cable is available (upon request) as an option.
The light fixture is weather rated to I.P 65.
The light's mounting bracket has pre-drilled holes to allow fixing using screws or bolts (not included).
Gray colored finish of light fixture.
Light fixture dimensions approx. 4.5" x 3.5" x 3" (11cm x 9cm x 8cm) LxWxD.
12 Volt DC system
A high capacity 12 Volt 92 Amp-Hr sealed lead acid battery are supplied.
Battery type is AGM. Gel battery is available by special order.
Batteries must be connected together in parallel.
A lockable battery box is supplied to accommodate the battery.
The battery box has a hinged lid which is lockable (padlock not included).
The battery box has an integral battery shelf and also houses the PCB controller.
Outlets are fitted on the box for the solar panel and lights to connect to.
The metal battery box is approx. 22" x 14" x 8" (56cm x 36cm x 20cm) LxWxD.
Aluminum framed 140 Watt solar panel is included and is fitted with approximately 18' (5.5m) of cable/cord. Additional cord is available as an optional extra.
Higher powered solar panel options may be available. For help determining whether a solar panel upgrade is necessary, please contact our customer service department.
The solar panel cable connects directly to the battery box.
The 140W solar panel dimensions approx. 44" x 38.7" x 1.5" (112cm x 98.5cm x 3.5cm) LxWxD.
Supplied with a MPPT charge controller which automatically controls the solar panel power, battery charging and lighting function and operation.
Ultra fast Maximum Power Point Tracking (MPPT).
The MPPT charge controller is typically 30% more efficient than standard PWM controllers and 10% more efficient to most other MPPT controllers.
Additional efficiency for cloudy weather and during times of reduced sun radiation.
This controller features the very latest smart technology.
Provides extended battery life and extra protection against excessive battery discharge and overcharge.
Battery life algorithm operates 24/7.
Low voltage detection for automatic disconnect.
Continuous environment, input and output power management.
The controller is sized to the system specifications with 10A and 15A versions available (subject to solar panel wattage and battery capacity).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
This MPPT charge controller is programmed by Solar Illuminations as per your requirements and system ability.
Lighting control features illumination from dusk to dawn (where applicable), or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
Dimming option (where applicable) allows the lighting to dim at any time during the illumination time.
Supports real time data monitoring (iPhone, Andriod, Mac or PC) with optional interface and/or Bluetooth dongle.
Battery voltage 12/24V dc auto select.
Rated charge current 10A/15A.
Peak efficiency is 98%.
Multi stage adaptive charge algorithm.
Automatic temperature compensation.
Protection feature includes battery reverse polarity (fuse), output short circuit and over temperature.
Operating temperature is -22 deg. F (-30 deg. C) to 140 deg. F (+60 deg. C).
Please note: Upon installation and power-up the controller goes into a 7 day evaluation mode where smart monitoring and configurations commence. Additional evaluation with self-managing adjustments may continue for up to 7 more days. This is all part of the smart feature that enables this intelligent controller to understand its use, the application, the surrounding environment and the current conditions. During this time some of its programmed features may differ temporarily. This is a perfectly normal process and must be accepted during that time. During this time the controller will adjust to the current condition and charge status of the batteries. It is therefore recommended that all batteries are 100% fully charged before connection using an appropriate battery charger. This may significantly reduce the evaluation mode time of 7+7 days to much less. The solar panel(s) should be connected to the MPPT charge controller first, followed by the fully charged batteries.
Easy to install. All connections are simply plug & play.
For up lighting from the ground, for sign lighting, we recommend fixing to a small, short wooden post (not included).
Solar panel is supplied with an attached u-shaped bracket for mounting.
20 year solar panel warranty, 5 year warranty on all other components (excluding batteries). Batteries are covered by the manufacturer.* Warranty registration is required (after purchase), otherwise a base one year warranty will apply. Go to www.solarilluminations.com/registration to register your warranty.
Lifetime unlimited technical support.
Please Note: This product is a special order and is non-returnable except in the event of a fault (during its warranty period) when the product, once returned will be repaired or replaced.
The solar panel must be installed in a location where it can receive full direct sunshine (when available) and usually set facing South at an appropriate angle (where adjustment options allow). The solar panel must not be installed in a shaded or part shaded location and never indoors. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted. These components are determined by your geographic location, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance. The illumination time is estimated and subject to various factors including (but not limited to) geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being 'defective' or 'not as described'. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
* View our Terms, Conditions and Polices (including our Returns Policy) for further information.
|Solar Lights Data|
|Lumen Output||900 Lumens per lamp.|
|Approximate Illumination Time||Typically dusk to dawn using 3 lamps, up to 10 hours using 3 lamps.|
|Approximate Flag Pole Height||Up to 40' (12m).|
|Solar Panel Wattage||140 Watts.|